8bits4ever presents the revolutionary EMUFDC!

8bits4ever presents the revolutionary EMUFDC!

by hamlet on 28-10-2019, 20:03
제목: Hardware
언어 설정:

A few weeks ago, after 8bits4ever launched their F1 Floppy Emulator, they got feedback from MSX users who wanted a system-specific MSX cartridge with an integrated disk controller able to load disk images and mount them just like real floppy disks.

8bits4ever made it real! The Emu-FDC can not only read disk images from an SD card but it also can be used to connect real floppy drives through a regular ribbon cable.
The cartridge runs the well known FlashFloppy firmware and features a microSD card slot and a regular 34 pin floppy connector.
It can access floppy disk images from the SD card and external floppy drives simultaneously making it great for backup and preservation projects

PRODUCT INFO
The Emu-FDC integrates a floppy disk controller and a disk emulator into a single cartridge. The emulator can read floppy disk images from a SD card and mount them so the system can access them as real floppy disks. It also allows to plug real PC floppy drives through a regular floppy ribbon cable. No modifications to the drives needed.
It can be used in three different configurations:

  • Emulated drive A: only, working with images from the SD
  • Emulated drive A: and external drive B:
  • Emulated drive disabled. Two external drives A: and B:

The Emu-FDC is compatible with MSX-DOS (requires at least 64k ram to run MSX-DOS) and contains Disk BASIC v1.1 in ROM. It works in MSX/MSX2/MSX2+/Turbo-R machines.

Attention: Physical floppy drives must support DD operation and must be externally powered!

TECH SPECS

  • Disk emulator running FlashFloppy firmware
  • 1x MicroSD slot
  • 1x 34 pin floppy connector, supports 1 or 2 external floppy drives
  • Internal 0.91" 128x32 OLED display
  • DD/DS support (360k or 720k per disk)
  • Runs Disk Basic 1.1. MSX-DOS compatible
  • MSX1, MSX2, MSX2+ and TurboR compatible

This product ships flashed with FlashFloppy firmware by Keir Fraser

Attention: Requires at least 64k RAM to load MSX-DOS. Machines with internal floppy drives might need those drives to be disconnected or disabled for the Emu-FDC to work properly.

The Emu-FDC will be available by mid November 2019 at our the 8bits4ever store.

Media browser (3)

  • 8bits4ever presents the revolutionary EMUFDC!
  • 8bits4ever presents the revolutionary EMUFDC!
  • 8bits4ever presents the revolutionary EMUFDC!

댓글 (32)

By enribar

Paladin (1004)

enribar의 아바타

29-10-2019, 08:55

This point is very useful to me, since I own many floppy disk to preserve:
"It can access floppy disk images from the SD card and external floppy drives simultaneously making it great for backup and preservation projects".
So I really don't need a second SD reader connected to the MSX to save dumps?

By Meits

Scribe (5647)

Meits의 아바타

29-10-2019, 13:41

Take my cash if it can read DMK files Smile

By fandenivoldsk

Supporter (12)

fandenivoldsk의 아바타

29-10-2019, 15:33

What is the best software to use if I want to copy a disk image to a real 3.5" floppy disk?

By zett

Hero (582)

zett의 아바타

29-10-2019, 16:31

that is realy cool

By OeiOeiVogeltje

Paragon (1310)

OeiOeiVogeltje의 아바타

29-10-2019, 17:03

Meits wrote:

Take my cash if it can read DMK files Smile

that

By 8bits4ever

Resident (39)

8bits4ever의 아바타

29-10-2019, 18:39

Meits wrote:

Take my cash if it can read DMK files Smile

If you can share a couple of images we can test them Smile

By correodiegols

Expert (74)

correodiegols의 아바타

29-10-2019, 20:48

Hello, includes SCC+ or other sound chip?

By Meits

Scribe (5647)

Meits의 아바타

29-10-2019, 23:52

8bits4ever wrote:
Meits wrote:

Take my cash if it can read DMK files Smile

If you can share a couple of images we can test them Smile

I've sent you a few. I hope you get them to work.

By ro

Guardian (4122)

ro의 아바타

30-10-2019, 09:17

Ow, this might be one of those projects that could be vital to MSX preservation. I mean, how many of you have broken diskdrives? Right, I have too. I'm ordering.

By gdx

Prophet (3083)

gdx의 아바타

30-10-2019, 09:42

This interfaces looks great, it seems perfect for MSXs without FDD interface. It's impressive as 8bits4ever is responsive.

By Moniz

Champion (341)

Moniz의 아바타

31-10-2019, 17:45

Is this great device already sold-out or just not available to pre-order yet?

By ToriHino

Champion (383)

ToriHino의 아바타

31-10-2019, 18:28

correodiegols wrote:

Hello, includes SCC+ or other sound chip?

Sure, why not put an SCC in every device Wink

By hamlet

Scribe (2620)

hamlet의 아바타

31-10-2019, 18:35

The device will be ready for shipping in a few weeks. We will give further informations.

By correodiegols

Expert (74)

correodiegols의 아바타

03-11-2019, 12:03

But device contents SCC+ or not?

By PAC

Guardian (5314)

PAC의 아바타

03-11-2019, 12:46

The specifications are clear. A feature like that would be listed for sure.

By Wolverine_nl

Paragon (1046)

Wolverine_nl의 아바타

06-11-2019, 12:56

correodiegols wrote:

But device contents SCC+ or not?

If it is not in the specifications, then not. Seems logic.

By Meits

Scribe (5647)

Meits의 아바타

06-11-2019, 13:08

Still curious if it can handle the DMK files I sent. That would give it deluxe value.

By sdsnatcher73

Hero (651)

sdsnatcher73의 아바타

06-11-2019, 20:15

I have a Gotek for Yamaha Side Slot (by RBSC), which also runs flashfloppy but I have not been able to use DMK images on it...

By sunn

Supporter (5)

sunn의 아바타

07-11-2019, 08:37

" Machines with internal floppy drives might need those drives to be disconnected or disabled for the Emu-FDC to work properly."

Could EMU-FDC be configured as the 2nd drive? Or how do we disable internal floppy drives? Disconneting the cable every time sounds troublesome.

By 8bits4ever

Resident (39)

8bits4ever의 아바타

12-11-2019, 17:53

sunn wrote:

" Machines with internal floppy drives might need those drives to be disconnected or disabled for the Emu-FDC to work properly."

Could EMU-FDC be configured as the 2nd drive? Or how do we disable internal floppy drives? Disconneting the cable every time sounds troublesome.

The Emu-FDC should be seen as "B" or "C", depending on how many drives you have on your machine, so you won't be able to boot from it.

By 8bits4ever

Resident (39)

8bits4ever의 아바타

12-11-2019, 17:59

Meits wrote:

Still curious if it can handle the DMK files I sent. That would give it deluxe value.

Sorry, we haven't been able to test them yet (very busy ATM). Hopefully we find some time to do it in the coming days. Thanks for the files by the way!

By Alexey

Guardian (2444)

Alexey의 아바타

27-11-2019, 21:49

Got my hands on the pre-production prototype, thanks to 8bits4ever. The overall impression is very positive. I will make some enhancements for the device and test them next week.

By Meits

Scribe (5647)

Meits의 아바타

17-11-2019, 21:38

8bits4ever wrote:
Meits wrote:

Still curious if it can handle the DMK files I sent. That would give it deluxe value.

Sorry, we haven't been able to test them yet (very busy ATM). Hopefully we find some time to do it in the coming days. Thanks for the files by the way!

No problem. I received your mail and am happy you gave it a shot. If you want to know more about the format, I'm not the man with the answers. I guess the openMSX guys could tell you more if you might want to give it a future go.

By Robby

Master (173)

Robby의 아바타

26-11-2019, 11:33

Grab your chance Smile

By Alexey

Guardian (2444)

Alexey의 아바타

27-11-2019, 21:52

Experimenting with the buttons design for this cartridge. The buttons will be printed in black PLA, the gaps will be filled with white UV-hardened white resin or with matching parts printed in white PLA.

By hamlet

Scribe (2620)

hamlet의 아바타

27-11-2019, 22:06

Beautyful!

By Robby

Master (173)

Robby의 아바타

28-11-2019, 14:42

Aren't these buttons already present on the initial batch, as for sale on the 8bits site?

By sunn

Supporter (5)

sunn의 아바타

29-11-2019, 10:07

Robby wrote:

Aren't these buttons already present on the initial batch, as for sale on the 8bits site?

They seem to be missing from the picture at least. And I don't think they have any carts for sale yet.

By Robby

Master (173)

Robby의 아바타

29-11-2019, 10:46

They did, just a matter of timing.... Wink

By enribar

Paladin (1004)

enribar의 아바타

06-12-2019, 11:09

I really don't want to miss this device, and so... is it possible to pre-order?

By Robby

Master (173)

Robby의 아바타

06-12-2019, 11:35

No pre-order AFAIK. Just a matter of looking frequently on their website, when out of stock isn't displayed anymore and the item can be selected/ordered.

By Alexey

Guardian (2444)

Alexey의 아바타

08-12-2019, 21:47

I created 4 sets of buttons and a cap for the FDD connector of this cartridge. Not ideal, but it works. The holder for the buttons is attached to the cartridge's case with a piece of thin 2-sided adhesive tape. Some pics:

The models can be downloaded from here:

https://www.thingiverse.com/thing:4029309