help me

페이지 2/3
1 | | 3

By makdissi-w

Rookie (17)

makdissi-w의 아바타

18-10-2019, 18:54

zPasi wrote:
makdissi-w wrote:

I used age 5 as a voice input from the recorder and 3 as ground. I used age 4 as the output from the computer to the recorder to record with ground number 1 and use 6 rem + and 7 rem-

Age?Smile
I think you pmean pins. in. Looks like you got it bacwards. Pin 5 should go to the mic and pin 4 to phono.

Yes pine I am sorry

By NYYRIKKI

Enlighted (5425)

NYYRIKKI의 아바타

18-10-2019, 19:16

makdissi-w wrote:

I think there is a hardware problem so I need circuit diagram schematic for it or for cassette line

I don't know about your model, but usually the implementation is something like this:

By makdissi-w

Rookie (17)

makdissi-w의 아바타

18-10-2019, 19:38

The model I have sakher msx ax170 but i think it is similar to the model sanyo mpc-200

By NYYRIKKI

Enlighted (5425)

NYYRIKKI의 아바타

18-10-2019, 23:44

I don't have the service manual, but if you want to try a super simple cassette input circuit, you can try ie.

It should get the job done, but you really need to turn the input volume to 11

By hamlet

Scribe (2824)

hamlet의 아바타

20-10-2019, 15:38

Did you correct the pin assignment like zPasi wrote?

Quote:

Age?Smile
I think you pmean pins. in. Looks like you got it bacwards. Pin 5 should go to the mic and pin 4 to phono.

By makdissi-w

Rookie (17)

makdissi-w의 아바타

20-10-2019, 20:16

Dear Hamlet, I am sorry, because I wrote more than Post. I did not mean. As for the friend zpasi here, I did not sell his method because the pin 5 is the audio input of the computer. And The number 4 is the data out from the computer.

By makdissi-w

Rookie (17)

makdissi-w의 아바타

20-10-2019, 21:11

I have already mentioned that I was able to record the data tape by pin number 4, but I just can not read the data from the pin number 5 It seems that there is a chapter in the circuit

By zPasi

Champion (489)

zPasi의 아바타

22-10-2019, 07:14

makdissi-w wrote:

I have already mentioned that I was able to record the data tape by pin number 4, but I just can not read the data from the pin number 5 It seems that there is a chapter in the circuit

According to specs, what I wrote earlier should be correct. You may have a short circuit there. That would explain how you are able to record to tape, but reading the tape doesn't work.

You have a multimeter, so you could "beep" check the cable?

By makdissi-w

Rookie (17)

makdissi-w의 아바타

23-10-2019, 13:50

My friends, I would like to thank all those who helped me. I have solved the problem after I opened the computer and followed the tracks from the pin cassette to the Ic CMOS no TC47HC04P . I found where the line input and output are. I was wrong about the connection. Please accept my apologies if I didn't listen to you.

By makdissi-w

Rookie (17)

makdissi-w의 아바타

23-10-2019, 13:54

Thank you zpasi and thank you hamlet and thank you nyyrikki thank you allllllllll

페이지 2/3
1 | | 3