Yamaha CX5MII/128 Upgrade to MSX2

페이지 4/4
1 | 2 | 3 |

By Jipe

Paragon (1594)

Jipe의 아바타

16-11-2007, 18:21

the original CX5MII as 16K Vram same all MSX1 with 2 x 16k x 4bits chips

with 128k memory is 4 x 64k x 4bits

By grit

Resident (53)

grit의 아바타

19-11-2007, 20:49

my fault and fixed, thanks!

By AuroraMSX

Paragon (1902)

AuroraMSX의 아바타

21-11-2007, 00:26

By dicksch

Supporter (6)

dicksch의 아바타

23-11-2007, 17:10

Got my CX5MII/128 to work. Found that I had a corrupted COMMAND2.COM file. Once I got that corrected the machine booted perfectly. Now have a CX5MII/128 (no clock chip even though all the parts are installed except for the RP05C) with a Sunrise IDE interface connected to a Hard disk and a CDROM. Since I have a single sided floppy drive the trick was to move only one file at a time on the floppy from a DOS PC to the hard drive. The second file would always be corrupted. Now with the CDROM I just burn all the downloaded software with my Slackware Linux machine and then move it to the CX5M. I would like to get the all the extra files from the MSX-DOS 2.

By Maggoo

Paragon (1217)

Maggoo의 아바타

13-07-2012, 22:42

Just got myself a CX5MII/128 (in nearly new condition !!!) and would like to upgrade the VRAM (don't care too much about the ROM upgrade). The upgrade seems fairly simple but since I'm a noob in soldering and all I want to be sure I use the right memory chips. Which one exactly should I be using and where can I buy those online?

페이지 4/4
1 | 2 | 3 |