Scart question about NMS 82xx series

Door bartl68

Expert (86)

afbeelding van bartl68

10-08-2010, 09:10

When you plugged in a scart to scart it works.
But when you plugged a converter to composite or s-vhs you wont get a screen , plain black.

is there a fix for it on the mainboard so you can plug in a converter?Question

Aangemeld of registreer om reacties te plaatsen

Van Jipe

Paragon (1594)

afbeelding van Jipe

10-08-2010, 10:38

composite signal already exist
on 8250 8255 8280 C-INCH YELLOW
on 8235 DIN 8 pin5 CVBS , pin 2 GROUND

Van bartl68

Expert (86)

afbeelding van bartl68

10-08-2010, 13:45

composite signal already exist
on 8250 8255 8280 C-INCH YELLOW

i know, but the output from scart seems to be better, but how to fix it when a converter is plugged in?

on 8235 DIN 8 pin5 CVBS , pin 2 GROUND

Van Wild_Penguin

Hero (644)

afbeelding van Wild_Penguin

10-08-2010, 14:20

When you are using SCART, you'll get RBG output. There's (probably) no CVBS in the NMS's SCART at all, that's why your adapter does not work. Even if there was CVBS in there, well then the adapter would work, but the point would be moot since the quality will be exactly the same as from the DIN in th 8235 or RCA(C-INCH) in the 825X. The connector itself does not make the quality any better Tongue

The NMS's probably don't have S-Video also at all, since the RGB is superior in quality to S-Video, and RGB was very common in TV's the days they were built (much more common than S-Video support), so adding S-Video to the connector would have served no point. So an S-Video adapter won't work either.