Door DanySoft
Champion (452)
19-05-2011, 22:17
Bluemsx supports V9990 ? From Menu option, select Video output is present V9938 , but no V9990?
OpenMSX was already in the V9990, but Bluemsx?
Van Manuel
Ascended (19270)
19-05-2011, 22:52
Only openMSX emulates the GFX9000 (V9990) at the moment.
Van DanySoft
19-05-2011, 22:59
Okey, OpenMSX is present on V9990, but ...
PowerBASIC on Turbo R is full power. But not msx2 or msx2+.... .... and bluemsx have second window for debug and tranier but OpenMSX no.... Bye
19-05-2011, 23:01
OpenMSX have tranier found ! But not easy. ok .
Bye
Van Creepy
Champion (335)
20-05-2011, 22:11
openMSX also has a debugger (its a separate download)
20-05-2011, 22:27
PowerBASIC is turboR, but G-BASIC is also MSX2 and up.
20-05-2011, 23:25
Yes, G-BASIC is found with V9990 on MSX2, but OpenMSX have problem : The Window is display one screen (MSX <-> v9990) use F10 and type
set videosource msx set videosource gfx9000
openmsx have one key brief to fast swap screen ?
Tanks !
21-05-2011, 00:06
Found soluzion : use bind : bind F6 "set videosource GFX9000" bind F7 "set videosource MSX"
21-05-2011, 22:28
Ok, but hey, have this new only problem :
GPUT SPRITE is only to two sprite 32x32 but not 16x16 x 126 sprites !?
IF set GVDP for screen P1/P2 and GPUT SPRITE is not available or use GVPOKE to set PUT SPRITE ?????
21-05-2011, 23:51
easier:
bind F6 "cycle videosource"
Don't you have an account yet? Become an MSX-friend and register an account!
Register now