openMSX reports

Pagina 1/2
| 2

Door pitpan

Prophet (3144)

afbeelding van pitpan

19-11-2004, 15:58

Hi!

I don't know if this is the right place, but I prefer to talk about it here.

I have experienced some problems using openMSX. The emulator itself is perfect, but I think that some of the specified machines aren't properly configured:

-PHILIPS VG-8020: in the implementation of this machine, openMSX considers that this computer has a memory mapper and only 64 KB.Hi!

I don't know if this is the right place, but I prefer to talk about it here.

I have experienced some problems using openMSX. The emulator itself is perfect, but I think that some of the specified machines aren't properly configured:

-PHILIPS VG-8020: in the implementation of this machine, openMSX considers that this computer has a memory mapper and only 64 KB. I know that this has been discussed in the past, but until now I have never found any VG-8020 with a mapper, and I owe 4. Perhaps it would be good to include the "mapped version" and "unmapped version" (64 KB RAM in third slot).

-SANYO MPC-100: again, a memory mapper problem. I owe 2 and they have 64 KB of RAM in the third slot, while openMSX says that the RAM is in the second slot. Maybe also different models exist!

Any idea?

By the way, I want to thank the openMSX team for their excellent work. It is now the only emulator that I use, and the WAV support is excellent: 100% MSX compliant!

Regards,

Edward Robsy

Aangemeld of registreer om reacties te plaatsen

Van pitpan

Prophet (3144)

afbeelding van pitpan

19-11-2004, 18:17

Ouch. I have visited the SourceForge place and then decided to send them a more detailed e-mail. Anyway, have you experienced any problems with this emulator? It is excellent!

Van Manuel

Ascended (18133)

afbeelding van Manuel

19-11-2004, 19:40

I have just checked the Philips VG-8020 configuration file, but it has not a memory mapper. Just 64kB plain RAM in slot 3-2.

Also the Toshiba HX-10 has plain 64kB RAM in slot 2 in openMSX. Possibly the RAM is in the wrong slot. Can someone check this on his real Toshiba HX-10 to verify pitpan's situation?

Note that this is not a problem in openMSX itself, but only the configuration files. Maybe a better topic for the thread would be "Machine specs" or something... Smile

Van mars2000you

Enlighted (5984)

afbeelding van mars2000you

19-11-2004, 20:05

Also the Toshiba HX-10 has plain 64kB RAM in slot 2 in openMSX. Possibly the RAM is in the wrong slot. Can someone check this on his real Toshiba HX-10 to verify pitpan's situation?

No, it's correct. There are even two Toshiba games on tape that were especially developed for this computer that has RAM in slot 2 : Break Out! and Checkmate!

These games can't be runned on MSX machines with RAM in slot 3.

Van pitpan

Prophet (3144)

afbeelding van pitpan

20-11-2004, 18:16

Hey! I was talking about the SANYO MPC-100. It should have the RAM in slot 3 and not in slot 2.

About the Philips VG-8020, if the RAM is in slot 3-2, that means an expanded slot system. In my experience, I have never found it in the real machine. My 4 Philips VG-8020 only have 64 KB of RAM in main slot 3, without subslots.

Van Manuel

Ascended (18133)

afbeelding van Manuel

20-11-2004, 18:34

ARGH! Sorry about the Toshiba/Sanyo thing!

There is normal RAM in slot 2 indeed. I also have an MPC-100, I'll check where the RAM is. SOmeone else can conform this?

I had a VG-8020 that had expanded slot 3. That's why you needed to type POKE -1,170 to get some software working.... Maybe we should make 2 configs indeed...
Do you have the /00 version?

Van pitpan

Prophet (3144)

afbeelding van pitpan

20-11-2004, 19:26

Yes, it is the /00 version, with no expanded slots at all.

The MPC100 that I owe is the brittish model: RAM in page 3. The same goes also for SANYO MPC64 and SANYO MPC200 MSX1 computers, very similar machines.

Van sunrise

Paragon (1091)

afbeelding van sunrise

21-11-2004, 22:26

I would like to see this happen also

Van mth

Champion (496)

afbeelding van mth

21-11-2004, 23:15

I used to have an MPC100 years ago. This was a UK model (including pound key), which was sold in Holland. AFAIK it has the RAM in slot 3.

Van Manuel

Ascended (18133)

afbeelding van Manuel

22-11-2004, 10:10

mth, OK, please change it in CVS then Smile

Van Manuel

Ascended (18133)

afbeelding van Manuel

29-11-2004, 19:04

Never mind, it's fixed in CVS now.

Pagina 1/2
| 2