mouse on openmsx or catapulta ?

Door DanySoft

Champion (451)

afbeelding van DanySoft

22-04-2012, 19:23

hello, my program is running to BASIC running catapult) and return no coordinate x,y (with mouse)

but running openmsx without parameters and get coordinate x,y of mouse is success !! But catapult is not corret o function with mouse ?

This catapult GUI is good and use V9990 to use graphics but no mouse running.
Please, i'm get new example of parameter of openmsx to running ? Or relase openmsx ? Is version 0.8.1!!
If ok, use this path and parameter to file .BAT to executer openmsx.

Talk You ! Big smile

Aangemeld of registreer om reacties te plaatsen

Van Manuel

Ascended (18256)

afbeelding van Manuel

22-04-2012, 21:29

Check the 2nd tab "Misc controls". It shows what is in Joystick port 1. Set it to 'mouse'.

Also, I recommend to upgrade to openMSX 0.8.2. It's the latest version that has quite some bug fixes compared to 0.8.1.

Van DanySoft

Champion (451)

afbeelding van DanySoft

22-04-2012, 21:35

yes, set input to mouse running openmsx with capapult but is not corret : y is move to down-right and ri-calibrate the
mouse set on and off the port for mouse. Insuccess.
But this 2° program : OpenMSX.exe is running and mouse is ok. Capapult is non correct function... why ?

the version of 0.8.1 is correct to this mouse ?

Van Manuel

Ascended (18256)

afbeelding van Manuel

22-04-2012, 21:54

Set it to 'mouse' and then click the Start button. I just tested that and it works fine here.

I don't think 0.8.2. has specific fixes on mouse, but it has many other bug fixes. There's no reason to still use 0.8.1...

Van DanySoft

Champion (451)

afbeelding van DanySoft

22-04-2012, 22:03

!!!!
Talk you Manuel, this is correct :
set port to mouse and click the start button and see to display: coordinate X,Y is correct.

This is necessary to work all screen in v99xx and v9990. (this is use for p1 and p2).
But use mouse is work else use COPY graphics to graphics move the mouse in area used GBASIC ver. 1.0.
Talk You!!
Big smile

Van Manuel

Ascended (18256)

afbeelding van Manuel

22-04-2012, 22:44

openMSX 0.8.2 does have fixes in GFX9000...

Van DanySoft

Champion (451)

afbeelding van DanySoft

23-04-2012, 22:20

Ok, ok, ok

Is not use my graphics program but use two utility : DD-GRAPH for v995x and age for v9990. This
program saved on graphics (with mouse) and exit, run my progam basic utility.
This load graphis (BLOAD) and execute with CALL TURBO ON/OFF (for intern, use &H98 and &H60)
and trasfert the graphics on page of screen active of v995x to screen select active of v9990.

And Done!
bye bye!
Big smile