Use ~10€ to connect modern mouse to MSX

Pagina 6/18
1 | 2 | 3 | 4 | 5 | | 7 | 8 | 9 | 10 | 11

Van zeilemaker54

Champion (276)

afbeelding van zeilemaker54

07-01-2014, 21:57

Hello

Nice topic. Also the second time (on msx.org) I see a direct quote from my msxsyssrc project files, the post by NYYRIKKI with the content of the S.NEWPAD BIOS routine. I have no problem with that, because that is what my project is all about. But it would be nice to mention the source of the content. After all, I have spend a few hours to create the files.

Van NYYRIKKI

Enlighted (5541)

afbeelding van NYYRIKKI

08-01-2014, 00:46

Yes, sorry about that... You have done wonderful job on the documentation! I've seen some original lines of MSX-BIOS source and they are much harder to read. Smile

Van lentini.j

Supporter (1)

afbeelding van lentini.j

16-01-2014, 09:38

HI EVERYONE! So i had no idea what MSX was up until i inherited a Roland S-760 sampler and followed this thread and constructed the PS/2 to MSX circuit with the above code uploaded into an UNO. I am am having an issue though... my mouse seems to keep sending "1000 x = 0 y = 0" which is causing the mouse sprite to continually return to the bottom right corner of the screen (has been driving me insane!)... anyone here have any idwa of how i can fix this so i can get to work? THANKS!

Van NYYRIKKI

Enlighted (5541)

afbeelding van NYYRIKKI

18-01-2014, 15:40

With Prodatron we made some minor changes to extended mouse protocol while implementing, but now all the details are updated to Wiki.

See here:
http://www.msx.org/wiki/Mouse/Trackball

Van gdx

Prophet (3501)

afbeelding van gdx

19-01-2014, 02:51

Is it possible to use this Arduino UNO R3 to make a 'PC keyboard to MSX keyboard connector' adapter ?

Van NYYRIKKI

Enlighted (5541)

afbeelding van NYYRIKKI

19-01-2014, 02:58

Hard to say... There is no such a thing as "MSX keyboard connector". Every manufacturer made their own solutions, so it depends of how it is implemented.

Van edoz

Prophet (2279)

afbeelding van edoz

19-01-2014, 12:37

NYYRIKKI wrote:

With Prodatron we made some minor changes to extended mouse protocol while implementing, but now all the details are updated to Wiki.

See here:
http://www.msx.org/wiki/Mouse/Trackball

Cool that it is working!!! Is there a list what your really need? (in terms of hardware?)

Van NYYRIKKI

Enlighted (5541)

afbeelding van NYYRIKKI

19-01-2014, 14:56

Yes, it is working

You need
- Arduino compatible board (Currently optimized for Atmega168/328)
- MSX joystick connector & cable with all 9 pins connected
- PS/2 mouse... most USB-mice are fine too.
- PS/2 or USB connector = Mini DIN 6 / USB A female (This is optional, you can also build it inside mouse)

For arduino board, I would recommend ie. Arduino Nano V3.0 because it has USB-port embedded.

If you need only short Joystick cable (about 70cm), then here is quite a good option, but if you need longer & better (140cm), then go for this one

You may also need a box... These are quite ok

Van edoz

Prophet (2279)

afbeelding van edoz

19-01-2014, 22:42

Thanks! This is really nice to have ! You guys did a good teamwork on this !
thanks for Sharing the details...! Hope to have that also working in the future...
bdw: nice movie ! I saw it this morning Wink

Van edoz

Prophet (2279)

afbeelding van edoz

21-01-2014, 21:20

Hi NYYRIKKI,

Did you test the new mouse protocol in symbos with a old MSX mouse on (not turbo-r) 3.5 Mhz ? And was this working ?

Pagina 6/18
1 | 2 | 3 | 4 | 5 | | 7 | 8 | 9 | 10 | 11