Status DalSoRi OPL4 board

Pagina 11/11
4 | 5 | 6 | 7 | 8 | 9 | 10 |

Van svBEERs

Champion (319)

afbeelding van svBEERs

19-11-2014, 09:50

AxelStone wrote:

I made a minimal hole and I bought a mini 3,5" jack output in order to use any external cable, I'll make a photo.

Yes. Please AxelStone, add a picture to see it before I´ll make mine.

Van mtn

Champion (262)

afbeelding van mtn

19-11-2014, 10:36

generally speaking, it might be easier to melt a small hole (dont waste your soldering tip on it tho) then to drill through.. And never forget to inhale the smoke!

Van AxelStone

Prophet (2765)

afbeelding van AxelStone

26-11-2014, 14:37

Here goes the pictures:


The hole


As you can see, a 3,5" mini-jack fix perfectly with this hole.

To make it I've used a normal drill: firts time use a slim drill to center the hole and then use one bigger. The best way to fix at the exact size of jack is trying several drills (from smaller to bigger) until you see that it fix perfectly.

Good luck.

Van msx fan finland

Champion (490)

afbeelding van msx fan finland

27-04-2018, 13:18

Hello.
I have a problem with my Dalsori.
Its a very good software but i need to contact now to the manufacturer.
JunSoft.
Send email to me plz : what.mika@gmail.com
I need your help now.

Thanks.
Mika
msx fan finland
Your Dalsori customer.

Pagina 11/11
4 | 5 | 6 | 7 | 8 | 9 | 10 |