VG-8235/20 External pc FDD help, and new FFD needed for internal

Door Langoor_

Supporter (4)

afbeelding van Langoor_

24-05-2015, 23:00

Hello guys!

I bought an VG-8235 second hand, it had some defects (Me and seller didnt knew about)
so, after reseating the rom, and cleaning pins, and adding some springs to the spacebar its mostly fixed!

now i am stuck with an broken drivebelt... Anyone a link to a cheap replacement one? i am now running on a diy drivebelt from some PVC tape Tongue but that isnt the best solution ever.

Also i would like to attach an 720Kb PC drive to the external port. I have a PSU to power the PC-FDD. Anyone some tips about this?

Aangemeld of registreer om reacties te plaatsen

Van roadfighter

Champion (404)

afbeelding van roadfighter

30-05-2015, 16:40

You will need to update your disk Rom first. Is it the 8235/00 or 8235/20 ?
If you have 1 Rom you can replace it with a 8245 rom an if you have 3 roms ( 2 bios, and a disk rom) you can replace the disk rom for version from a 82xx. Then you need to make a hardware modification for the use of double sided drives.
You can look for it in the Hans Otten site, dont have the link or the version from Bas Kornalijnslijper but his site is down.

Van Jipe

Paragon (1404)

afbeelding van Jipe

30-05-2015, 17:33

the 8235/20 is the same of 8235/39
puting the 8245 rom
see at :

Van o.geerdink

Hero (567)

afbeelding van o.geerdink

30-05-2015, 19:26

Use a inner bicycle tire cut in little pieces for drivebelts. It works well

Van Guts

Expert (87)

afbeelding van Guts

31-05-2015, 09:23

Remember not all 3.5 disk drive's work, I tryed 6 off them only 1 work on my 8235/00.
Same disk drive need some hackes to get it work on the msx.
I made a better FDD cable using Bas Kornalijnslijper guide (yes I have this guide) Wink
Works great BA-team

Van gdx

Prophet (3817)

afbeelding van gdx

31-05-2015, 10:12

Make a cable:

And as Jipe says the Disk-ROM from VG8245 is needed.