About extension "Konami Ultimate Collection" in openMSX.

Pagina 3/5
1 | 2 | | 4 | 5

Van Manuel

Ascended (18254)

afbeelding van Manuel

09-01-2017, 20:35

You simply have to do exactly the same as on the real hardware... What went wrong? What did you try and what happened?

And apparently that KUC.rom you got was not OK, otherwise it would have worked with the mapper type.

Van bakoulis

Master (166)

afbeelding van bakoulis

09-01-2017, 21:01

What is the proper procedure for real hardware?
Where can I write the needed kuc.rom and flash utility which used, before flashing on real hardware?
I believe on IDE disk. So, I used turbor with IDE and kuc ext. but it don't boot if I haven't MFR+SD ext!
So, I boot with MFR+SD and KUC ext together but the flash abort.
The KUC file is proper, because I took it from a serious source.

Van Manuel

Ascended (18254)

afbeelding van Manuel

09-01-2017, 23:35

If the KUC file is proper, it just works when using the romtype trick, when I try it at least Smile

I used also an IDE with KUC extension. What do you mean with "it doesn't boot"? turboR with IDE boots fine with me and it should...

Van bakoulis

Master (166)

afbeelding van bakoulis

10-01-2017, 11:49

Maybe you have right about boot. Maybe it boots, but it drops me at basic prompt.
I don't know what must put on IDE dsk image to boot DOS or Nextor.
So, from basic prompt, I can't flash the kuc extension!!!
Can you give me some directions for that?

P.S. The kuc.rom file is proper for sure, but didn't work with romtype trick.
Question

Van Manuel

Ascended (18254)

afbeelding van Manuel

10-01-2017, 14:13

Well, you do the same thing as you do when you have a real IDE: put MSX-DOS2 or Nextor on the first partition Smile Via a disk in the floppy drive that contains MSX-DOS2 (or Nextor) and just copy the files in BASIC to drive A: and reboot. That is, if you have partitioned the IDE harddisk. To do that you can run IDEPAR.COM from floppy after booting with the DEL key. This is all in the manual of the Sunrise IDE.

Or use diskmanipulator if you want to take a shortcut. It can create partitioned IDE images and import files onto them.

Van bakoulis

Master (166)

afbeelding van bakoulis

10-01-2017, 15:25

Thank you for the help. I will try it tonight at home.
Smile

Van bakoulis

Master (166)

afbeelding van bakoulis

10-01-2017, 22:57

I have troubles to make a working harddisk file.
Can you send me one ready partitioned, formated and bootable?
I believe a 32MB fat12 will be enough for flashing the extension.
Question

Van Manuel

Ascended (18254)

afbeelding van Manuel

10-01-2017, 23:33

What are the problems you're having? I'm sure I can help out Smile

Van bakoulis

Master (166)

afbeelding van bakoulis

11-01-2017, 01:21

Finally I have a working HD file 32MB with the Diskmanipulator command!
I have flashed the KUC extension and now it works as it should!
The key was the use of Diskmanipulator command.
Thanks for the help.
Smile

Van Manuel

Ascended (18254)

afbeelding van Manuel

11-01-2017, 07:11

Great to read that! I still wonder why it's not working with the KUC mapper type though. That should be equivalent.

Pagina 3/5
1 | 2 | | 4 | 5