SD512 by 8bit4ever, help!

Pagina 1/2
| 2

Door aceki

Master (147)

afbeelding van aceki

09-02-2018, 13:41

Boys like they are, yesterday I arrive, and today I am trying without luck to walk

I have 3 different SD, 1 SD and 2 Micro SD, all format with win10 in FAT and I only make a partition of 50 mb, I put the command and nextor.sys inside the partition and there I put it in the cartridge

The VG-8235 detects the same, but when it starts it does so in nextor basic.

If I call fdisk, I choose the partition, and nothing is left looking for the partition (although it detects the SD when the cartridge starts)

Is something missing?

Aangemeld of registreer om reacties te plaatsen

Van Wolverine_nl

Paragon (1140)

afbeelding van Wolverine_nl

09-02-2018, 13:44

Hello aceki,

You said FAT, you need to format those as FAT16, be sure of this, otherwise use fdisk on the MSX to make the partitions and formats.

Van aceki

Master (147)

afbeelding van aceki

09-02-2018, 14:04

Thanks for your answer, if I try to create the partition with the fdisk it does not leave me, it hangs reading the SD card (a white LED stays on in the SD)

On the other hand, FAT in windows, is not FAT16? otherwise, I'm clearly commenting on the error there (Windows 10 is my operating system used)

Van Grauw

Ascended (9478)

afbeelding van Grauw

09-02-2018, 16:48

FAT in windows is typically FAT32, which Nextor doesn’t support.

Van aceki

Master (147)

afbeelding van aceki

09-02-2018, 16:56

Which I recommend to use to make partitions in FAT16, since from the msx, I can not do it either Sad

Van Pentarou

Champion (295)

afbeelding van Pentarou

09-02-2018, 18:00

When you boot keep the "1" key pressed until you get to the basic prompt, then use "call fdisk".

Van aceki

Master (147)

afbeelding van aceki

09-02-2018, 18:36

perfect, I'm going to try that !!, I was struck by the fact that it was hanging.

Van odaman68000

Rookie (22)

afbeelding van odaman68000

11-02-2018, 15:55

Did you try SD formatter from SD Association?
It can be downloaded from https://www.sdcard.org/downloads/formatter_4/index.html.

Van 8bits4ever

Resident (45)

afbeelding van 8bits4ever

12-02-2018, 11:39

Hello! We recommend formatting the SD card under Windows XP or Windows 7. This seems to be the most reliable.

If the card has been previously used is best you use SDFormatter to erase it, as suggested previously.

If you need further support please contact us through our website or email. We are happy to help.

Van Manuel

Ascended (17265)

afbeelding van Manuel

12-02-2018, 11:56

I don't think someone would downgrade his Windows installation to format an SD card.... So better find some alternatives I'd say.

Van Pencioner

Scribe (1280)

afbeelding van Pencioner

12-02-2018, 12:24

Manuel wrote:

I don't think someone would downgrade his Windows installation to format an SD card.... So better find some alternatives I'd say.

In the desperation maybe downloading some official prepared virtualbox images from ms edge and using them in virtualbox for formatting the sd card might help.

EDIT: i noticed after posting this link that they no more offer windowd 7 images, what a pity. sorry, i used to use that for borrowing the win7 image for this kind of temporary tasks if needed...

Pagina 1/2
| 2