Fixing Panasonic FS-A1 MK2 firmware issues

Pagina 2/3
1 | | 3

Van sd_snatcher

Prophet (3068)

afbeelding van sd_snatcher

30-12-2018, 15:25

@Roxbury

Tip: If you save only the first 64KB of the original ROM to the W27C512, it will work just fine.

Van gdx

Prophet (3035)

afbeelding van gdx

30-12-2018, 15:38

sd_snatcher is right but you can find it here:
https://mon-partage.fr/f/HuD93GPF/

Van Roxbury

Supporter (3)

afbeelding van Roxbury

30-12-2018, 22:12

Thank you sd_snatcher & gdx

Van Roxbury

Supporter (3)

afbeelding van Roxbury

02-01-2019, 11:16

I have burned the rom and installed, all working fine, thanks again.

Van NYYRIKKI

Enlighted (5382)

afbeelding van NYYRIKKI

02-01-2019, 11:40

I don't know this machine, but reading the comments... Can't you just cut the pin 22 of original ROM and ground it? Do you really have to replace the whole chip?

Van gdx

Prophet (3035)

afbeelding van gdx

02-01-2019, 12:35

I prefer the method that does not damage the original, when it is possible to put back as originally.

Van Josevil

Master (142)

afbeelding van Josevil

16-09-2019, 00:22

what differences are there between a and b it is necessary to have to activate the rtc with graft key I say it by carnivore2, and read that the real time clock is necessary in msx2 and +

Van sdsnatcher73

Hero (583)

afbeelding van sdsnatcher73

16-09-2019, 04:39

Josevil wrote:

what differences are there between a and b it is necessary to have to activate the rtc with graft key I say it by carnivore2, and read that the real time clock is necessary in msx2 and +

So after reading the whole thread, the difference between a and b version supplied by gdx is really just a reset option for the sram. In MSX2 and higher you can save some screen settings, boot text and the time in the sram which is powered in the FS-A1mk2 by two AA batteries. A reset of the SRAM can be helpful if someone saved the screen at width 3 with strange colors. Same can be however be achieved by removing the batteries for a short time.

Van Josevil

Master (142)

afbeelding van Josevil

16-09-2019, 23:21

OK thanks Sdsnatcher73

Van l_oliveira

Hero (526)

afbeelding van l_oliveira

08-10-2019, 14:24

Usually when I do this for people I upgrade the computer to MSX2+ too, because it's so simple to replace the VDP since you are already rewriting the main ROM. I have a specially modified MSX2+ ROM which always display boot logo (no need for F4 port). If the computer is a model that has kanji font (A1F) it works even better because then call kanji works, too.

I usually put basic kun compiler at the place of the firmware so it ends similar to a Sanyo 2+ when it's the A1F...

Pagina 2/3
1 | | 3