GFX9000 howto

Pagina 1/2
| 2

Door jltursan

Prophet (2535)

afbeelding van jltursan

30-11-2006, 16:05

I've recently received a GFX9000 card; but I'm having some trouble with it. I've been able to lauch picview and seems that the card is working fine; but till now it has been impossible to launch the PowerBASIC or demos from the demodisk. Of course I'm using a TurboR (ST); but I need something more to launch PowerBASIC?, every time I try it it shows an error "direct statement in file", could be the disk damaged or incomplete?.
Also, I've been looking for a GFX9K noob guide, how to install?, how to make some simple programs? and so on; but without luck...

Aangemeld of registreer om reacties te plaatsen

Van mohai

Paladin (930)

afbeelding van mohai

30-11-2006, 17:46

Maybe the disk is faulty. Try to copy to another. If it is faulty, i can send you an image.
I think on the disk there should be some program to load GBASIC. If i am not wrong it was for Turbo-R.
To get info on the card, http://map.tni.nl/resources/ is a good start. There are some libraries made arround by AIRAM.
Also, try on the Sunrise page. You can download a lot of soft for it http://www.msx.ch/sunformsx/
Original documents from Yamaha are too extensive and programing examples are few.

Van viejo_archivero

Paragon (1395)

afbeelding van viejo_archivero

30-11-2006, 18:22

I've recently received a GFX9000 card

"Caverns of Titan GFX9000" is on the go, jl? Smile

Van msd

Paragon (1461)

afbeelding van msd

30-11-2006, 18:46

Can you write asm?

Van Manuel

Ascended (18086)

afbeelding van Manuel

30-11-2006, 18:49

How to install? Oo

Useful resources have been mentioned. If you have more concrete questions, just ask them here Smile

(And yes, it seems your disk is broken. But it's easy to get PowerBasic, I suppose?)

Van jltursan

Prophet (2535)

afbeelding van jltursan

30-11-2006, 22:36

Thanks for the info!. I've been browsing all of this sites lately; but I overlooked them cause the PowerBASIC in the Sunrise page seems pretty different of the one supplied with the card. Now I've just download this file and I've found that my disk labelled "G.BASIC/PowerBASIC" misses some files that the LZH downloaded has. So I'm going to replace it and see what happens. Anyway I'll be happy to find full diskimages of the damaged disks...

"Caverns of Titan GFX9000" is on the go, jl?

Bwahahahahaha!

Can you write asm?

Sure!

How to install?

eeeerm....bad expression here....it would be more appropiate "How to set-up the card being a total noob?", all that stuff about that funny extra RGB connector and how to launch in less than a minute a colourfull demo to lure the friend that has come to see your new toy... Tongue

Van msd

Paragon (1461)

afbeelding van msd

30-11-2006, 23:01

www.teambomba.net Download some gfx9000 stuff here. Try the gfx9000 lib :)

Van Manuel

Ascended (18086)

afbeelding van Manuel

30-11-2006, 23:41

WEll, just connect the connector to a monitor and run some GFX9000 program Smile

PowerBasic is completely different than G-Basic, btw.

Van Prodatron

Paragon (1789)

afbeelding van Prodatron

01-12-2006, 02:50

Could be possible, that I have similiar problems like Jltursan, but "Underwater demo" works fine Smile
Is it possible to download the XTAZY intro/preview somewhere???

Van Prodatron

Paragon (1789)

afbeelding van Prodatron

01-12-2006, 03:16

Jltursan, check this Smile
http://www.msx.org/X-Tazy-introdemo-1.2.newspost3687.html
But I couldn't find the first level yet...

Van BiFi

Enlighted (4348)

afbeelding van BiFi

01-12-2006, 07:45

Pagina 1/2
| 2