clueless about floppy issues

Pagina 1/2
| 2

Door charliefrown

Supporter (15)

afbeelding van charliefrown

12-12-2018, 22:54

Hi,

I was very excited to finally get my first MSX2 - VG 8235/20, which came with single side floppy with broken belt. I managed to replace the belt, but here is the thing. I can see the belt spinning just fine, I can see the red light on - signaling floppy activity, but I wont succeed in formatting the floppy. Each time I write "call format" , then I choose A, it's spinning, but it's strangely quiet (no disk writing noise I can hear on my Macintosh/Amiga/PC) and it would never finish Crying After two minutes or so it's still trying to format the floppy to no avail. Any ideas, what might be wrong with my floppy drive?
The disk was earlier formatted in my Macintosh SE/30 as single (400k) floppy if it matters. Any suggestion will be appreciated.

Aangemeld of registreer om reacties te plaatsen

Van Hans41

Expert (70)

afbeelding van Hans41

13-12-2018, 13:33

Are you sure the belt isn't slipping ?

Van Vampier

Prophet (2297)

afbeelding van Vampier

13-12-2018, 23:39

That's why I bought a MegaFlashROM SCC+ SD (512Kb mem mapper) or a gr8net... no more drives needed Big smile

Van Meits

Scribe (5538)

afbeelding van Meits

14-12-2018, 02:27

Is the head actually moving?

Van JohnHassink

Ambassador (5413)

afbeelding van JohnHassink

14-12-2018, 05:35

Meits wrote:

Is the head actually moving?


Sorry, sorry. :)

Van charliefrown

Supporter (15)

afbeelding van charliefrown

14-12-2018, 11:30

I think I need to check the voltage on the 4 pin Berg connector, maybe the power supply is failing. Will add video later.

Van luppie

Paladin (854)

afbeelding van luppie

14-12-2018, 18:26

Rofl

Van charliefrown

Supporter (15)

afbeelding van charliefrown

21-01-2019, 10:02

Ok guys here's some update:

I used DiskManager and dcopy to put some .dsk games on 720 kB floppy formated on my PC. No game does autoboot, giving me disk offline 10 error, however I can successfully display the content of the disk with FILES, but it fails to run any games manually. However I am able to save my basic programs to the floppy and run them - it seems my floppy drive is not compeletely dead! Would it make any difference if I formatted floppy as 360kB on a different MSX2 that I own before transfering .dsk to disk with dcopy?

Van Hans41

Expert (70)

afbeelding van Hans41

21-01-2019, 11:31

Formatting the disk on a real MSX and in 360kb format would make the disc compatible. Any other format or formatted on a non MSX machine will likely cause issues.

Assuming you're still talking about your vg8235, it's best to format the disk in 360kb on one of your other MSX's.

Disks don't have eternal life. To be sure, maybe use / try more than one floppy. Wink

And obviously, disk images of 360kb are the only ones you can use. Crying

An option: connect a pc drive to the external drive connector. Then you can use 720kb floppies / images.
That drive will be a B-drive. With certain POKES, you can temporarily change the B-drive to an A-drive and even 'reboot' from the B-drive (temporarily acting as an A-drive).

Van Wild_Penguin

Hero (546)

afbeelding van Wild_Penguin

21-01-2019, 12:05

Head motor broken? Can you move the head motor shaft manually, does it rotate freely (while the thing is powered off, of course)?

(Perhaps just the track0 is enough for rearing and writing very small files and FAT?)

Van Albert77

Rookie (21)

afbeelding van Albert77

22-01-2019, 06:36

Time to get a gotek and a Double sided diskrom Evil (I tried it in my sanyo wavy 70fd2 & nms 8250)
It works perfect Running Naked in a Field of Flowers

Pagina 1/2
| 2