PRE-ORDER: Carnivore2 assembled in Russia

Pagina 8/18
1 | 2 | 3 | 4 | 5 | 6 | 7 | | 9 | 10 | 11 | 12 | 13

Van meits

Scribe (6528)

afbeelding van meits

24-07-2020, 20:51

For those who don't read this forum, will you inform them by e-mail as well if they still need to do something?

Van Pentarou

Champion (472)

afbeelding van Pentarou

25-07-2020, 00:58

A question to the builder (Sorry for the OT):
I've seen the assembled PCB photos on the Wiki and noticed that you have the audio connector soldered on the "wrong" side (Interesting solution, btw).
Wouldn't that mean that the L and R audio channels are wrong (swapped) compared to a "normal" C2?

Van Wierzbowsky

Guardian (3527)

afbeelding van Wierzbowsky

25-07-2020, 11:37

Yes, that is correct. The channels will be swapped. Is thay a problem for anyone?

Van meits

Scribe (6528)

afbeelding van meits

25-07-2020, 11:43

Not for me. The built in chips are mono anyway.
Or is there a command to set left and right? Then it would be a bit awkward, but nothing more than that.

Van Wierzbowsky

Guardian (3527)

afbeelding van Wierzbowsky

25-07-2020, 20:37

FMPAC is still stereo. But its stereo mode can be disabled. Then there's no more problem with the swapped channels. Smile

Van Manuel

Ascended (19058)

afbeelding van Manuel

25-07-2020, 23:20

Meits wrote:

For those who don't read this forum, will you inform them by e-mail as well if they still need to do something?

I'm wondering about this as well.

Van Wierzbowsky

Guardian (3527)

afbeelding van Wierzbowsky

26-07-2020, 12:42

Those, who ordered the cartridge, will be contacted by e-mail if there are some outstanding issues.

Van Nprod

Expert (100)

afbeelding van Nprod

26-07-2020, 21:37

What is the stereo jack for anyway? Does the sound output not work with the computer's native audio port?

Van Maxiol

Supporter (15)

afbeelding van Maxiol

27-07-2020, 06:36

Van Wierzbowsky

Guardian (3527)

afbeelding van Wierzbowsky

27-07-2020, 13:27

Nprod wrote:

What is the stereo jack for anyway? Does the sound output not work with the computer's native audio port?

You can get all sounds and music from Carnivore2's audio socket if you enable PSG and PPI clicker. And FMPAC will be stereo, but you can switch it to mono if you wish. No more need to get the rather noisy audio from a computer's own audio output.

Pagina 8/18
1 | 2 | 3 | 4 | 5 | 6 | 7 | | 9 | 10 | 11 | 12 | 13