CIEL Expert-Turbo - cassette interface?

Door pgimeno

Champion (298)

afbeelding van pgimeno

19-04-2020, 20:14

We've been discussing on IRC the removal of the cassette interface from the OpenMSX machine specification, on the grounds that it doesn't have a CLOAD/CSAVE command and that "CAS:" is not a valid filename for LOAD, SAVE, BLOAD, BSAVE or RUN.

Does anyone know if this board contains a tape interface? A quick look at the schematics suggests that it doesn't, but I may have missed it.

Aangemeld of registreer om reacties te plaatsen

Van iamweasel2

Paladin (683)

afbeelding van iamweasel2

19-04-2020, 23:40

I believe the BIOS routines that deal with cassette were removed to make space for the _turboon / _turboff calls. But since it uses the same analogic board used in Expert 1, it should work with cassettes. Anyway, I never tested it, but I think you can make the test by loading a BIOS with cassette routines in RAM and use it.

Van vbeltrao

Supporter (3)

afbeelding van vbeltrao

23-07-2021, 11:41

Howdy.

You can easily use cassette commands on a ciel2+ by using another rom. You can use cassette related commands and they will work flawlessly when you use another rom such as the one patched by Belavenuto.

{mod: joined double post}

Van iamweasel2

Paladin (683)

afbeelding van iamweasel2

23-07-2021, 18:15

vbeltrao wrote:

Howdy.

You can easily use cassette commands on a ciel2+ by using another rom. You can use cassette related commands and they will work flawlessly when you use another rom such as the one patched by Belavenuto.

{mod: joined double post}

I never heard of this patch made by Belavenuto. What exactly was patched (just the cassette routines) ? Is there a site where we can find it ?