Zemmix: no sound

Door Hypersoft

Expert (74)

afbeelding van Hypersoft

10-05-2020, 20:12

I connect my Zemmix with a VGA cable to the Samsung T200HD
For the VGA i have a good image, but.....no sound, i connected two cables (red/white) to my Audio in of the T200HD

When i connect my Zemmix only through SCART, i have sound, but srappy image. Thats why i want the VGA

How do i get the sound working

Aangemeld of registreer om reacties te plaatsen

Van Parn

Paladin (832)

afbeelding van Parn

11-05-2020, 02:48

Just connect your Zemmix Audio Out to the PC Audio In jack on the back of the monitor. I don't know which Zemmix do you have, but you'll probably need a stereo cable with 2 RCA plugs on one end and a stereo P2 plug (3.5mm stereo TRS) on the other end.

Van Hypersoft

Expert (74)

afbeelding van Hypersoft

11-05-2020, 04:43

Where can i see what version of Zemmix i have.

Van Parn

Paladin (832)

afbeelding van Parn

11-05-2020, 13:58

I mean, looking at your previous messages I assume you have some kind of Zemmix Neo, but these were made in different countries and can be different from each other, so I shouldn't assume your Zemmix is the same as my Zemmix Neo made in Brazil. Just look at the back of the console. Which kind of Audio Out connectors does it have? A pair of RCA connectors, one colored red and other colored white? I believe those are called "cinch" in Europe. If so, just follow my previous advice.

Van Hypersoft

Expert (74)

afbeelding van Hypersoft

17-05-2020, 17:40

Hello,

I just got the stereo cable with 2 RCA plugs on one end and a stereo P2 plug (3.5mm stereo TRS), and connected the 3.5mm into my speakers, and it works !!!

Thank you for helping me out.