SG-1000 to MSX Conversions By Me (Inspired By Hap)

Pagina 1/3
| 2 | 3

Door TaylorsEverythi...

Champion (395)

afbeelding van TaylorsEverythingChannel

25-05-2020, 20:31

I've decided to try something new. I've done 5 SG-1000 conversions for the MSX. I've followed it from the Bomb Jack SG2MSX patch. To be honest, they all work well, although there is some problems. As I followed, the SG-1000 uses BEh and BFh, while MSX is 98h and 99h. They're both Z80 processors and they're similar, but they don't use the same sound chip, because the MSX uses the AY-3-8910 and the SG-1000 uses the SN76489. They all don't have sound, but Nyan Cat already had no sound to it. Is there anything wrong I'm doing here?
https://drive.google.com/open?id=1FCnIueOjhpHNufVTtQu8e5aFI9...

Aangemeld of registreer om reacties te plaatsen

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

25-05-2020, 21:51

I also did change the controller ports too.

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

26-05-2020, 01:47

But, the controls don't work.

Van tfh

Prophet (2864)

afbeelding van tfh

26-05-2020, 08:50

I wanted to have a go today at these, but... without controls that will be quite hard Smile

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

26-05-2020, 14:11

Yeah, I even try to follow how to use the controls and try to get the music codes converted too, but lucky for you, Nyan Cat works well without the controls and no sound because that's how it was.

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

26-05-2020, 19:34

I might even ask Hap if there's anything wrong or what I need to change in these files.

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

20-11-2020, 00:49

Nevermind, I am working hard on controls and I'm done with the SN76489.

Van gdx

Enlighted (4383)

afbeelding van gdx

20-11-2020, 01:49

Look into SG1000.COM source code, it's very easy for controls. You can see where and how it's patched for audio, controls, and VDP. All games work perfectly. I was not able to make to work one homebrew only.

SG-1000 games are much easier to convert than Coleco games.

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

20-11-2020, 15:24

I'll take your response.

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

20-11-2020, 16:38

gdx, I've done Space Slalom, and it works. Thanks. :-D

Van TaylorsEverythingChannel

Champion (395)

afbeelding van TaylorsEverythingChannel

06-12-2020, 18:20

I've done some SLotman related stuff too. Right now, this conversion of Choplifter is a WIP. Either the loader SLotman has worked on reads the controls or there are some redirects.
{hamlet don't care about those links, please read my comment below}

Pagina 1/3
| 2 | 3