Using Carnivore 2, Nextor and SofaRun

Pagina 4/4
1 | 2 | 3 |

Van Grauw

Ascended (10066)

afbeelding van Grauw

29-01-2021, 22:39

Maybe other Manuel can explain the method to bypass the FS-A1 firmware Smile.

Van Louthrax

Prophet (2406)

afbeelding van Louthrax

29-01-2021, 22:46

Nobody reads the Manuel... Tongue

Van Manuel

Ascended (18154)

afbeelding van Manuel

29-01-2021, 23:18

Yes, that would be nice, so that other cartridges can also implement it (like e.g. Carnivore 2).

Van gdx

Enlighted (4695)

afbeelding van gdx

30-01-2021, 09:34

I was found the method on a Japanese site some time ago and I think I posted the link in the MRC forums but I can't find it again. This method is functional for only a few MSX models.

Van Pencioner

Scribe (1462)

afbeelding van Pencioner

30-01-2021, 11:31

Manuel wrote:

Yes, that would be nice, so that other cartridges can also implement it (like e.g. Carnivore 2).

I doubt Manuel Pazos disclose this because it is a competing product so here we get kind of "know how" Smile

Van sdsnatcher73

Prophet (2237)

afbeelding van sdsnatcher73

30-01-2021, 12:48

Well I think Manuel would share it if asked. Also I think it can easily be reverse engineered as it is implemented in the recovery ROM of MFR so some disassembly should give the answer to how it is done.

Van Fabio_acrs

Supporter (7)

afbeelding van Fabio_acrs

29-08-2021, 01:21

I'm not a good user of this tool but lets go....

I had a problem with my carnivore2 not detecting the cf sometimes on boot. Turned out to be a power supply needing maintenance.

About some roms like alest2 not running on the flash ..... they need a preset files.
https://github.com/RBSC/Carnivore2/tree/master/Presets

Pagina 4/4
1 | 2 | 3 |