Hi all,
my 8245 connected to tv via scart has the white dispalyed as light blue, everything is ok with the rf.
Already tested with different scart cables and 3 different tv's.
What i can check?
I had that too the problem was the rgb From lcd tv sets
The problem is the voltage when the tv must select the rgb Channel
The output From the msx is 5 volt to switch to rgb the Some never tv sets uses the 3.3 volt so you Should solder a resistor to select the rgb it worked for me for the msx and amiga
On pin 8 of the scart 1Kohm and on pin 16 75 ohm
tested on an older crt:
If i use a standard scart cable i get the bluish white, if i use the modified one the image is not stable...
Perhapse the msx is sending wrong signals on scart pins? How i can check this?
