Carnivore2 : First impressions and bugs...

Página 19/52
12 | 13 | 14 | 15 | 16 | 17 | 18 | | 20 | 21 | 22 | 23 | 24

Por hardwaremaker

Master (243)

imagem de hardwaremaker

01-03-2018, 13:56

Alexey wrote:

Maybe 8bits4ever could comment on availability. Or Carmeloco.

If the BIN files were not up-to-date, please also update the firmware to enable PSG. Otherwise the latest boot block will not be able to enable/disable PSG and clicker.

At this moment, I don't have in stock. I make cartridges when I have about seven orders, for make a litle batch of ten units.

I'm Carmeloco in other forums, but I'm hardwaremaker in this Smile

Por djh1697

Paragon (1643)

imagem de djh1697

01-03-2018, 21:02

hardwaremaker wrote:

I make cartridges when I have about seven orders, for make a litle batch of ten units.

The 8bits4ever website states "out of stock" and it is impossible to order? https://www.8bits4ever.net/product-page/carnivore2-gold

Por djh1697

Paragon (1643)

imagem de djh1697

01-03-2018, 22:29

Alexey wrote:

Please also update the firmware to enable PSG. Otherwise the latest boot block will not be able to enable/disable PSG and clicker.

Which are the correct files to be updated?

Por Wierzbowsky

Guardian (3443)

imagem de Wierzbowsky

02-03-2018, 02:03

djh1697 wrote:
Alexey wrote:

Please also update the firmware to enable PSG. Otherwise the latest boot block will not be able to enable/disable PSG and clicker.

Which are the correct files to be updated?

Firmware: https://github.com/RBSC/Carnivore2/tree/master/Firmware
Boot block: https://github.com/RBSC/Carnivore2/tree/master/BootBlock

Por 8bits4ever

Resident (55)

imagem de 8bits4ever

05-03-2018, 17:01

Alexey wrote:

Maybe 8bits4ever could comment on availability. Or Carmeloco.

We have a new batch in the works. If everything goes good, we should have units available by the 2nd/3rd week of March

Por Sepulep

Resident (36)

imagem de Sepulep

11-03-2018, 08:08

I am trying to update the firmware.. I have (apparently succesfully) flashed the new firmware using the usb blaster (verify okI think) - its however not detected when i tried running c2man under MSX-DOS 1:-( do I need a certain version of msx-dos or anything else, or should I retry flashing??

Por Wierzbowsky

Guardian (3443)

imagem de Wierzbowsky

11-03-2018, 19:05

Sepulep wrote:

I am trying to update the firmware.. I have (apparently succesfully) flashed the new firmware using the usb blaster (verify okI think) - its however not detected when i tried running c2man under MSX-DOS 1:-( do I need a certain version of msx-dos or anything else, or should I retry flashing??

Was it detected before the firmware update? Try to input the slot number when C2MAN asks. Try 01 or 10 for the first slot and 02 or 20 for the second slot.

Por syn

Prophet (2097)

imagem de syn

11-03-2018, 19:28

I havent read the entire topic, so I got a quick question:

I noticed the 8bits4ever version does not come with a connector for usb blaster. Can we update it from msx/CF card?

Por Wierzbowsky

Guardian (3443)

imagem de Wierzbowsky

11-03-2018, 20:01

syn wrote:

I havent read the entire topic, so I got a quick question:
I noticed the 8bits4ever version does not come with a connector for usb blaster. Can we update it from msx/CF card?

No, the firmware can be only updated with USB Blaster. You don't need to solder a connector. Just use the 5x2 dual row pins and insert them into the AS connector holes on one side and into the USB Blaster female cable on the other side. Tilt it a bit for better connectivity.

Por Sepulep

Resident (36)

imagem de Sepulep

11-03-2018, 21:10

Alexey wrote:

Was it detected before the firmware update? Try to input the slot number when C2MAN asks. Try 01 or 10 for the first slot and 02 or 20 for the second slot.

yes, it was detected and fully functional (but with the older firmware, I think from september or so), inputting the slot number (10 worked before) doesn't make a difference...

(the error is:
FlashROM chip's type is not detected!
This cartridge is not open for writing or may be defective!
Try to reboot and hold down F5 key...
(the reboot with F5 doesn't make a difference)
)

Página 19/52
12 | 13 | 14 | 15 | 16 | 17 | 18 | | 20 | 21 | 22 | 23 | 24