MSX adapter for Nintendo 64 controllers

MSX adapter for Nintendo 64 controllers

por Danjovic em 19-08-2019, 05:29
Tópico: Hardware
Idiomas:

This project lets you play MSX games using Nintendo 64 controllers.
The several N64 controller buttons are mapped on a variety of combinations for the MSX and the analog stick can act both as directional controls and as standard Paddles.

Relevant link: Project page

Comentários (8)

Por gdx

Prophet (3084)

imagem de gdx

21-08-2019, 15:39

Interest is very limited if there is no compatible mode with standard MSX controllers and no autofire.

Por Grauw

Ascended (8508)

imagem de Grauw

21-08-2019, 18:12

It is compatible with standard MSX controllers and does have autofire I think.

But the 100 ms latency is very high.

Por Danjovic

Expert (83)

imagem de Danjovic

21-08-2019, 18:58

100 ms is the time it takes for transitioning from servicing paddles to normal mode.
The latency in normal mode is 10ms.
When paddles are being continuously sampled the latency is equal to the sampling rate of the paddles (usually 16.6 or 20ms for 60/50Hz machines)
Autofire rate is fixed at 8 Hz but I think it is too fast, at least in ZANAC.

Whole project is open source and was designed to be easy to replicate and modify.

Por gdx

Prophet (3084)

imagem de gdx

22-08-2019, 02:01

Nice!

Por Danjovic

Expert (83)

imagem de Danjovic

22-08-2019, 02:35

By the way the schematic is very straightforward: One Arduino Nano, one resistor and a pair of extension cords, one for the Nintendo 64 controller and another for MSX.

Por mohai

Paladin (841)

imagem de mohai

24-08-2019, 21:22

Can this work as a mouse for MSX?

Por Danjovic

Expert (83)

imagem de Danjovic

25-08-2019, 00:38

I think so! The analog stick can behave a mouse with some change on the code. Do you know of any good program to test a mouse on a MSX1 ?

Por roadfighter

Champion (395)

imagem de roadfighter

15-09-2019, 08:49

HID test from FRS

Good program to test (almost) everything, connected to the joystick port.