A1-ST cannot save screen settings

By Morg

Master (142)

Аватар пользователя Morg

08-01-2011, 12:27

Hello there,

I have a MSX TURBO-R A1ST. I really like to use it setting width 80. My problem is that I cannot save the settings.

I have already tried SET SCREEN command, and I also have changed several times the batteries (at the bottom of the computer).

I think that's a hardware problem, but I don't know how to repair it.

Any idea?

Thanks,
Alex

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By snout

Ascended (15187)

Аватар пользователя snout

08-01-2011, 12:29

Doesn't the A1ST, like the A1GT use an ordinary penlite battery? Check the bottom of your turboR and check for a battery cover!

By coldbreeze

Expert (127)

Аватар пользователя coldbreeze

08-01-2011, 13:03

I had the same problem with my Turbo-R GT. Try removing the batteries (2xAA) and cleaning up the contacts. It worked for me. (The old batteries in my computer must have leaked and oxidised the contacts)

By Sarcasmic

Master (149)

Аватар пользователя Sarcasmic

08-01-2011, 13:13

indeed a battery problem i have the same thing here ! (need to put new battery's in it)

By Leo

Paragon (1236)

Аватар пользователя Leo

08-01-2011, 13:27

battery

By Morg

Master (142)

Аватар пользователя Morg

08-01-2011, 14:04

Thanks for answering.

Anyway, I already cleaned the contacts and I already changed the batteries (several times).

By snout

Ascended (15187)

Аватар пользователя snout

08-01-2011, 14:08

Are you using alkaline or rechargeable batteries? I vaguely remember my GT being quite picky with rechargeables... Also, are you sure that nothing is running at boot that might change the width?

By Morg

Master (142)

Аватар пользователя Morg

08-01-2011, 14:12

The last time I changed the batteries I used ones from IKEA.

I think I'll check again and I'll post the results, or some photos, if that helps.

Thanks,
Alex

By Jipe

Paragon (1571)

Аватар пользователя Jipe

08-01-2011, 21:55

inside GT and ST you ave a little connector , check it and wires