Sony HB-F1XDJ RGB Pinout

Страница 1/4
| 2 | 3 | 4

By Opethian

Master (147)

Аватар пользователя Opethian

11-02-2014, 21:06

Does anyone have the manual to this model for the RGB DIN pinout? I have a SCART cable that doesn't display properly and I want to confirm the DIN pinout.

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By Opethian

Master (147)

Аватар пользователя Opethian

11-02-2014, 21:07

RGB connector (Japanese models)
(Giovanni R. Nunes)

DIN 8 pins female

1 GND
2 AUDIO
3 NC
4 C SYNC
5 +5V
6 R
7 G
8 B

7 6
3 8 1
5 4
2

this is the diagram I followed but it doesn't seem to work correctly.

By jltursan

Prophet (2619)

Аватар пользователя jltursan

11-02-2014, 23:01

It's mostly correct.

Check RGB - SCART cable section in the MSX hardware FAQ for a complete description.

By Opethian

Master (147)

Аватар пользователя Opethian

12-02-2014, 16:37

oh pins 3 and 5 are totally different looks like I'll need em

By ApolloBoy

Expert (96)

Аватар пользователя ApolloBoy

15-02-2014, 11:06

I've also got an HB-F1XDJ and I'm pretty sure my SCART cable doesn't have pins 3 or 5 wired up. All you really need are the RGB pins, ground, audio and composite sync.

By jltursan

Prophet (2619)

Аватар пользователя jltursan

15-02-2014, 18:26

That usually doesn't work if you use a TV set, only with RGB monitors.

By Marq

Champion (387)

Аватар пользователя Marq

15-02-2014, 19:21

You need to connect the 5V line to the SCART blanking pin through a resistor of around 100..200 Ohm. That's needed for most TV sets.

By ApolloBoy

Expert (96)

Аватар пользователя ApolloBoy

16-02-2014, 01:37

Marq wrote:

You need to connect the 5V line to the SCART blanking pin through a resistor of around 100..200 Ohm. That's needed for most TV sets.

Isn't that just for autoswitching though? Plus, I know the OP (he actually sold me my copy of Nemesis 3!) and I believe he uses an RGB monitor so the autoswitching stuff isn't necessary.

By Marq

Champion (387)

Аватар пользователя Marq

16-02-2014, 09:15

On most TV sets I've seen there's no way to force the RGB and they tend to default to composite. It won't hurt with RGB monitors, either, if you use the same tube for other machines as well.

By Opethian

Master (147)

Аватар пользователя Opethian

21-02-2014, 22:23

I intend to use this on a sony PVM-14L5 with audio broken out of course.

By bakoulis

Master (166)

Аватар пользователя bakoulis

22-02-2014, 00:04

I have also the Sony HB-F1XDJ and a good friend build a cable for me, from the http://www.faq.msxnet.org/connector.html
The cable works perfect on my Samsung 32' LCD TV. When turn on my MSX, the TV autoswitching to MSX screen.

SONY HB700 RGB plug: (seen from cable side)

7 6

3 8 1

5 4
2

SCART connector: (seen from cable side)

+---------------------------------------------+
\ 20 18 16 14 12 10 8 6 4 2 |
\ |
| 19 17 15 13 11 9 7 5 3 1 |
+-------------------------------------------+

How to connect:

RGB: Description: SCART:
1 audio ground 4 (and 5, 9, 13, 14, 18 to be sure)
2 audio right 2 (and 6 (mono))
3 status CVBS 8
4 CVBS 20
5 status RGB 16
6 red 15
7 green 11
8 blue 7

Страница 1/4
| 2 | 3 | 4