Bricked Neo Zemmix

Страница 1/5
| 2 | 3 | 4 | 5

By pitpan

Prophet (3145)

Аватар пользователя pitpan

29-07-2014, 16:52

Hi everyone!

Due to using the wrong tool to load a DSK I came up flashing my Neo Zemmix with the contents of Rune Master II. Yes, I know, it is *so* funny, but now I'm stuck with a bricked Neo Zemmix.

How can I fix it? Do I need extra hardware, such as a special cable to reflash it from a PC? Or can I just reflash it using a SD card and some black magic? Any help will be welcome!

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By pitpan

Prophet (3145)

Аватар пользователя pitpan

29-07-2014, 17:18

I see: USB blaster, screwdriver, patience, a Windooze PC. Sh*t! Big sh*t! Holy big sh*t!

By Manuel

Ascended (18247)

Аватар пользователя Manuel

29-07-2014, 20:45

Good luck! Sad

By KdL

Paragon (1413)

Аватар пользователя KdL

29-07-2014, 21:09

sent pvt email with detail Wink

By pitpan

Prophet (3145)

Аватар пользователя pitpan

29-07-2014, 23:00

Cheers! I'll try it out!

By toticb

Master (213)

Аватар пользователя toticb

04-08-2014, 15:28

Hello.
I bricked too my zemmix neo updating the firmware(wrong tool or file??) oO oO
I have the usb blaster and quartus 2 v9.0 sp2 web edition(32 bits) and the new firrmware from kdl,but when the flashing operation starts reports an error.
on the tutorials says that the altera must be in program mode(run to program),but where is this switch in the zemmix neo?

thanks

By mygodess

Champion (275)

Аватар пользователя mygodess

04-08-2014, 17:13

[pitpan]
Oh... Sorry to hear that. I can download those but you need to send it back to Korea and it costs way to much.
Just look for some guy who has use blaster.

[toticb]
You need to use at least quartus v.11 to flash firmware.

By pitpan

Prophet (3145)

Аватар пользователя pitpan

04-08-2014, 17:36

No problem! USB Blaster compatible cable on its way from UK, according to eBay Wink

By toticb

Master (213)

Аватар пользователя toticb

04-08-2014, 20:27

Hi,i tried with quartus v11(link of the howto file) with the same results.
How can we turn the zemmix neo at the program mode?

Thanks

By tarkus666

Rookie (22)

Аватар пользователя tarkus666

04-08-2014, 20:48

look at the cable that connects the zemmix to usb blaster, try with other position. I made the same mistake and quartus v11 and the usb blaster works!

By KdL

Paragon (1413)

Аватар пользователя KdL

04-08-2014, 22:20

Recovery Guide
Here is how to flash the device after a failed update using a personal computer with Windows OS.

1. Buy and install a compatible download cable for EPCS4 like USB ByteBlaster.
http://hobbycomponents.com/index.php/altera-fpga-cpld-usb-pr... (coupon 10% off is “HC10OFF” )
2. Download and install Altera Programmer for Windows (freeware):
http://download.altera.com/akdlm/software/acds/11.0sp1/208/s...
3. Open the case of your 1chipMSX or Zemmix Neo and attach the cable on the JTAG connector with the pin-1 towards the front of device.
4. Run the programmer and power on the device, select active serial programming method to load the 'recovery.pof' file.

Страница 1/5
| 2 | 3 | 4 | 5