Canon V-30F MSX2

Страница 4/11
1 | 2 | 3 | | 5 | 6 | 7 | 8 | 9

By popolon_

Champion (261)

Аватар пользователя popolon_

01-11-2021, 20:14

Floppy drive is YE data?
IMG_20211101_211058365.jpg
IMG_20211101_211159493.jpg

By popolon_

Champion (261)

Аватар пользователя popolon_

01-11-2021, 20:34

Lower pcb:
IMG_20211101_212724874.jpg
Rf/videoaudio closeup:
IMG_20211101_212731062.jpg

By msxholder

Champion (399)

Аватар пользователя msxholder

01-11-2021, 20:55

The drive and videoprint looks the same as in yamaha models.

By popolon_

Champion (261)

Аватар пользователя popolon_

01-11-2021, 20:56

Power supply opened:
IMG_20211101_215405049.jpg

By gdx

Enlighted (5503)

Аватар пользователя gdx

02-11-2021, 01:30

Cant you take a picture of the lower PCB under the RF/videoaudio block please?

By popolon_

Champion (261)

Аватар пользователя popolon_

02-11-2021, 06:48

Rf board aluminium enclosure legs are going throught that lower pcb and are twisted and soldered at the back side of that pcb. So wuold need desoldering to have that picture under rf. Under rf there is that vram expansion socket and in both sides of it there are those vram chips(2 total).
IMG_20211102_074150594.jpg
IMG_20211102_074157470.jpg
IMG_20211102_074343565.jpg
IMG_20211102_074357405.jpg
IMG_20211102_074409309.jpg

By gdx

Enlighted (5503)

Аватар пользователя gdx

02-11-2021, 08:29

I would be happy to see this refurbished MSX. Do you intend to do it and make this famous VRAM cartridge?
It's a bit sad an MSX2 with only 64kB of VRAM. Especially a model like this.

By popolon_

Champion (261)

Аватар пользователя popolon_

02-11-2021, 08:36

Yes, i intend to do that vram pcb. In the auction pictures, there was password prompt shown, is that normal msx boot thing? I have not powered on this msx yet, and the bios battery has been disconnected, so not sure if there is any password prompt still.

By gdx

Enlighted (5503)

Аватар пользователя gdx

02-11-2021, 08:49

I think this is the password set with SET PASSWORD. It should no longer be there removing the batteries.

By Briqunullus

Champion (512)

Аватар пользователя Briqunullus

02-11-2021, 08:41

You can bypass that password by pressing GRAPH+SELECT. Or something like that. It's been a long time since I needed that combo. But with the battery out of the way, I think the password is gone anyway.

Страница 4/11
1 | 2 | 3 | | 5 | 6 | 7 | 8 | 9