Hi !
I just wonder if someone have listened audio quality difference about panasonic wsx or turbo-r and other brand MSX2+ like Sony or Sanyo....
I have a Panasonic Turbo-R A1st and a Sony MSX2+ HB XDJ and the second have a far better audio quality....
Time ago i had a Panasonic MSX2+ WSX and had same worst audio of Turbo-R.....
Were is the problem?
There is some kind of mod to correct this flat noised and undetailed audio?
Best Regards.
Davide.
Для того, чтобы оставить комментарий, необходимо регистрация или !login
Indeed, the A1ST is known for having a lot of noise on the audio output. I didn't know the WSX shared this problem though. In case of the turbo R, it was corrected with the GT. I remember 'fixing' the issue back in the way back by putting a capacitor between the audio output and the grouding pin, plus a resistor on the audio line. It wasn't a perfect fix, but it did filter out most of the noise. I *think* it might've been a 47uF capacitor and 100 Ohms resistor, but this was more than 10 years ago, so I may very well be wrong. Try to ask a techie (maybe repair-bas knows) or just experiment with a couple of caps and a variable resistor. It shouldn't be too hard to find a combination that filters out most of the noise...
