Can’t get to word processor menu on A1WSX

By radicalfaith360

Expert (82)

Аватар пользователя radicalfaith360

03-11-2018, 19:43

I get a message in Japanese when I try to get to that menu. Any idea what’s going on?

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By Meits

Scribe (5864)

Аватар пользователя Meits

03-11-2018, 19:54

make sure you have the switch left of the reset button slided completely to the left... if it's not completely to the left it will show that error (blue screen with one line in the center) about not enough memory being present.

By engineer

Supporter (9)

Аватар пользователя engineer

03-11-2018, 21:39

Meits wrote:

make sure you have the switch left of the reset button slided completely to the left... if it's not completely to the left it will show that error (blue screen with one line in the center) about not enough memory being present.

What is that little switch for? I have been assuming its the 'turbo' switch to move from 3 to 5 MHz.

By radicalfaith360

Expert (82)

Аватар пользователя radicalfaith360

03-11-2018, 21:51

Yeah I have the switch completely to the left and still get that error. It happens when I try to type in callmenu also.

By radicalfaith360

Expert (82)

Аватар пользователя radicalfaith360

03-11-2018, 22:01

I’m all set. My external floppy drive was using extra memory. Thanks everybody.

By Meits

Scribe (5864)

Аватар пользователя Meits

03-11-2018, 23:15

That switch is not a turbo switch. Only a firmware switch. Right is of, left is on.
In fact there is no turbo switch at all. It can only be switched to turbo mode by software/out commands. Check the wiki of any panasonic msx2+