Print from msx using printer port to network printer?

By popolon_

Master (153)

Аватар пользователя popolon_

11-06-2020, 14:11

Is there any projects/adapters(e.g. using arduino) to print from msx printer port to some modern network printer? So the msx would see the network printer as parallel port printer?

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By sd_snatcher

Prophet (3443)

Аватар пользователя sd_snatcher

11-06-2020, 14:51

In theory, this could be easily done in the MSX itself, using a network interface. The hooks HLPTO and HLPTS allow the printer output to be redirected to wherever you want.

That's what I love the most about this standard. Most of the work can be done by itself, just redirecting things. Smile

By roadfighter

Champion (417)

Аватар пользователя roadfighter

10-12-2020, 17:15

Using the Gr8net or the BadCat wifi adapter for printing? Would be nice, maybe it could be implemented in the firmware?
Redirecting the &h90,x and &H91,x from the to a file or network printer.
Or this might be a solution, but that is by Rasberry Pi. ->
This is a piece i copied out of my email correspondence with the reproprinter guys.


I don't know anything about MSX computers - but basically the device
(currently) will connect to anything with a centronics port and it can
work with programs sending (a) plain text, (b) Epson printer codes
(ESC/P and ESC/P2) and (c) HP printer codes (PCL5 and PCL 6). We are
also considering how best to offer an option with a serial port
The converted data is output using the standard CUPs printer on Linux -
so yes, you can use a network printer (or any other printer which the
Raspberry Pi can talk to).

I think this should work with a MSX to?