Copy files from SCSI disc to IDE -CF

By edoz

Prophet (2465)

Аватар пользователя edoz

24-03-2010, 21:01

Hi all,

Is it possible to insert, at the same time..in free slots... the Bert SCSI interface using 1 HD and the Sunrise IDE-CF using a memory flash card ?
I want to transfer files from my SCSI HD to the Memory CF card using my Turbo-r GT ?

Thanks..

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By RetroTechie

Paragon (1563)

Аватар пользователя RetroTechie

25-03-2010, 01:05

Ehmm... why would this *not* be possible Question Why not just try?

By edoz

Prophet (2465)

Аватар пользователя edoz

25-03-2010, 09:24

I try to insert both. If I do so, the MSX detects the SCSI drivers and memory flash card but the MSX do not starts MSX dos anymore. (Stops after the detect drives screen, before starting dos)

I think it has something to do with the active partition. If I insert a empty flash card inside the CF IDE interface the MSX boots from the SCSI device.
But after that how can I use the empty flash card just inserted ?

By Bastiaan

Champion (333)

Аватар пользователя Bastiaan

25-03-2010, 11:00

have you tried booting with graph/ ins/ del/ return / pressed?

By Jipe

Paragon (1594)

Аватар пользователя Jipe

25-03-2010, 11:23

i don't know with BERT but working with Mega-SCSI and IDE-CF

try changing the slot order

By edoz

Prophet (2465)

Аватар пользователя edoz

25-03-2010, 16:19

Ok ... i try the 'graph,ins, del, return option... but .. what key disable what function ?
The slot order is not the problem.. i think .. the problem is who is booting the a: partion .. but that's a feeling..

Wink

By Jipe

Paragon (1594)

Аватар пользователя Jipe

25-03-2010, 18:49

if the SCSI is in slot 1 you boot on SCSI Drive A: partition , if you have 4 SCSI partition the IDE is on E:

if the IDE-CF is in slot 1 you boot on CF Drive A: partition , if you have 4 IDE partition SCSI in on E:

is the same way but not the same boot finaly

By edoz

Prophet (2465)

Аватар пользователя edoz

28-03-2010, 08:43

Hey Jipe .. it works!! .. thanks .. It's true, the boot sequence is depending! I didn’t know that.
If I insert the BERT in slot 1 and the IDE in slot 2 the BERT boots and I get the first partition from the IDE on F: When the MSX boots I see first the SCSI initializing and after that the IDE initializing..
But if I swap both controllers (BERT in slot 2 and IDE in slot 1) I get an error not enough memory found. In this case while booting first is the IDE displayed and after that the SCSI controller..