Floppy drive cables

Страница 1/3
| 2 | 3

By JACK98

Rookie (19)

Аватар пользователя JACK98

28-04-2010, 00:15

Being nitwit i am,i accidentally broke the floppy drive cable on my philips 8235,is there any replaceable cables available or alternative way of connecting the drive now Crying,i found a pic of same msx model opened up,the white socket cable with green stripes is the one i need

http://farm4.static.flickr.com/3341/3617497487_cd316f5557_b.jpg

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By Eugeny_Brychkov

Paragon (1232)

Аватар пользователя Eugeny_Brychkov

28-04-2010, 01:51

The first idea is to try to repair cable, of course depending on how you broke it... If it's just some wires at connector side, then you can easily repair them (removing pin sockets from connector and soldering broken wires).

By JACK98

Rookie (19)

Аватар пользователя JACK98

28-04-2010, 02:02

one or two cables broke,but was kinda messed up from start,i did put grey one in wrong place when came loose,is there any wiring charts for it,and what about the connection,ie would it be like a normal p.c,putting the socket into pin 1?.

By RetroTechie

Paragon (1563)

Аватар пользователя RetroTechie

28-04-2010, 15:10

With original drive + cable, repairing the cable you have is by far the easiest, and best method...

Wiring diagrams are in the service manual (maybe elsewhere too). If you grab the service manual, make sure you have the correct one (8235/00, 8235/20 etc) as differences between these 'sub-models' are exactly in the diskdrive wiring (among a few other things).

By JACK98

Rookie (19)

Аватар пользователя JACK98

28-04-2010, 15:16

lucky i managed to get another cable from excellent seller
http://www.bas-ditta.info/index.htm

By JACK98

Rookie (19)

Аватар пользователя JACK98

04-05-2010, 17:41

stuck again Sad,i got the cable and installed like in the guide here ,but the drive only makes a brief noise,then thats it,when i type in call format,nothing happens,otherwise the drive led lights up and all Crying

guide
http://www.bas-ditta.info/verkoopenlinks/doehetzelf/8235dubbelzijdig.htm

By Jipe

Paragon (1594)

Аватар пользователя Jipe

04-05-2010, 17:49

if you use a PC 1.4Mo try CALL FORMAT with B: because DS1 is selected in this model

By JACK98

Rookie (19)

Аватар пользователя JACK98

04-05-2010, 18:16

By Manuel

Ascended (19273)

Аватар пользователя Manuel

04-05-2010, 18:39

If the drive LED is lit continuously, you have the cable upside down.

By JACK98

Rookie (19)

Аватар пользователя JACK98

04-05-2010, 19:23

i took a pic of the cables,maybe im do something wrong there?

By xgipe

Champion (397)

Аватар пользователя xgipe

04-05-2010, 23:24

Does the motor spin?
If not, (and you are using the original drive) you probably have a broken motor belt...
If the LED is always lit, you must turn the cables 180º at the connector.

Otherwise, if you are using a PC drive, remind that you must hack the unit to use it as DS0... instead of the DS1 default in PC drives.

Страница 1/3
| 2 | 3