Search results
Sony HB-F700D signal loss
Score: 985.98 %,
Type: Forum topic , Comments: 2 comments
again! But then after a few minutes, TV said "No signal" and all was black and again I was 46 ... to set up my good old Sony HB-F700D again and for good now. I connected it via RGB->SCART cable to my ... Unfortunately the HB-F700D has this weird A/V connector so you’ll need a cable for that as well. Only RF output ...
Idea for full motion video - MSX 2 - Screen 4 - NTSC 20fps - 16 shades of gray
Score: 175.33 %,
Type: Forum topic , Comments: 15 comments
one being full black and other full white. Only 6 shades of gray remaining...
Excuse me, but 4 ... a frame of a resolution of 64x192, plus a sprite layer covering 67% of the screen to improve ... Double buffering with 2 pages of VRAM (there are 8 on screen 4). Pretty simple code on MSX side.
Each ...
VDP... and some really deep stuff. :)
Score: 114.32 %,
Type: Forum topic , Comments: 13 comments
this black magic really works.
So... Lets take a bit closer look of this 8bit multiply proram. ... the example is written on SCREEN 8 with 8bits/pixel, this program is actually doing 2048 multiplications ... the problem "rotate 90" as it reminds me very much of a problem to rotate SCREEN 2 bitmap by 90°) ...
Mycom BASIC Magazine
Score: 96.2 %,
Type: wiki , Comments: 0 comments
by Tedzuka Ichirou)
Masaru-kun, Patch Shio! - Masaru, let's patch! (program)
White & Black (program) ... (program by Yu-Taka)
ACT (program)
Moko, Character creation tool for SCREEN2
[21]
1986-06
48
Hana ... by Tinople Software)
Namco Pac Mania: First screen (Music for MSX-Music)
Namco Metal Hawk: BGM1 (Music)
Disk ...
Conway's game of life
Score: 115.91 %,
Type: Forum topic , Comments: 6 comments
So, assuming you want a black/white screen, and just turn on/off pixels, this is what I would suggest: ... "bitmap mode").
- Then set all 6144 bytes of the "attribute table" to 0xf0 (black ... to the pattern table, and setting bits to 1 or 0 to change colors from black to white or vice-versa
- If you ...
PTC MSX PC - cartridges not working - need help troubleshooting
Score: 116.19 %,
Type: Forum topic , Comments: 6 comments
a black screen is shown on the PTC MSX. I own two cartridges, they test OK on a standard MSX machine. ... carts still boot to a black screen. But the MegaFlashROM now displays the same exact code every time ... the black screen. That is not normal so there has to be something that can be observed. Is the CPU active ...
Configuring openMSX on a Rasbperry Pi with Sedai Linux
Score: 115.11 %,
Type: Forum topic , Comments: 3 comments
it is flashed/imaged. I was unable to access the command prompt. Pressing F1 after boot would result in a black screen ...
Eprom Cartridge Rev 1.5
Score: 117.05 %,
Type: Forum topic , Comments: 36 comments
with the RamTest) but when I pop this into the cartridge slot of my HX-10 all I get is a black screen and a humming ...
I faced the same black screen problem like you with the cartridge pcb from 8 bit manshed with my ... not set a jumper for CS1, CS2 or CS12 at all - otherwise you will get a black screen even if you slide ...
Omega MSX2 - function trouble
Score: 114.86 %,
Type: Forum topic , Comments: 7 comments
it worked and sometimes it didn't - computer not booting, I see black screen and they do nothing) ...
Equivalent of INIGRP for Screen 4?
Score: 176.64 %,
Type: Forum topic , Comments: 8 comments
FillVRAM(0x1800, 0x0200, 0x01);
//flatten colors
FillVRAM(0x2000, 0x1800, 0x1F);
COLOR(WHITE, BLACK, BLACK ... on the screen by VRAM fills but I need to make sure I've initialized Screen 4 properly first. Can I just use INIGRP and set the sprite mode later, or is there a specific one for Screen 4 that I should ...
