Search results
dsk, rom on real MSX?
Score: 98.01 %,
Type: Forum topic , Comments: 36 comments
in an emulator?
Is the hole covered up with black tape? not clear tape? Is the hole covered up with black ... disks...should i use ducktape or black tape?
clear tape is no good - that is your problem - drives use ... disks aswell...with finally, i'm getting games to work on HD disks aswell...with black tape ...
Putting an image in the screen?
Score: 136.11 %,
Type: Forum topic , Comments: 46 comments
only the upper and lower band of the screen turn black. The middle screen area always stay blue. Is ... help I have come this far writing a square on a black screen that changes color upon keypress ... to register 14 instead of 45.
Then you write 128 bytes of $10, which is a black pixel and a transparent ...
Loading a bitmap straight in without conversion
Score: 91.16 %,
Type: Forum topic , Comments: 14 comments
is in order. By that i mean 0=black 1=blue etc. Changing the values of the bitmap shows double colors ... in increments of the adress pointer but the VDP must be told to start on the lower part of the screen and work ... (tiles, screens and sprites). Depending on the desired output I run it through one of my converters.
I ...
Screen 4
Score: 138.15 %,
Type: Forum topic , Comments: 55 comments
components:
1: 0000h, Pattern generator table. Defines 4 times 256 8x8 tiles of 8 bytes each (black ... for the main player - otherwise, you'll end up with black borders on your character, or even worst: color ... So I have been fidling around with screen 4 for a long time but all I get is a nice yellow ...
Looking for game title
Score: 74.84 %,
Type: Forum topic , Comments: 15 comments
and the backround was pitch black.
Then at each stage. An object would come in which moved at a kinda stationary ... remember 100%) green/white small block which is located stationary at the lower bottom of the screen. You ... having another movement pattern etc etc until your screen was full with all kinds of different types ...
Parralax scrolling in screen 5
Score: 135.89 %,
Type: Forum topic , Comments: 19 comments
scrollregister (needed for animation speed) needs things repetitive in 4 pixels
Need 50% black space or blue ... a page with what you like to see. Mask the left and right border with 8 pixels width black bars (I am ... in tile mode (screen 1, 2, 4) is probably the best option and is limited to simple structures, see Space ...
Need to verifiy something
Score: 78.96 %,
Type: Forum topic , Comments: 11 comments
msx you will notice a black square in the top left of your screen. I have no clue what happens ... the SPAT into the VDP all the sprites are hidden at the X = 0 and Y = 255 coordinates. This is in screen ... on the real HW using a V9958 I see those empty sprites apear in the uppermost left of the screen. I really ...
Panasonic WX 256K RAM
Score: 83.65 %,
Type: Forum topic , Comments: 4 comments
Something is not going right. Soldered in the 44c256 chips removed the 84164's. soldered in the 100n caps. Cut the trace between J2 (GND) and connected J3 (5V). Result: Black screen no response. Dead MSX.
What did I miss?
check the wires in the DRAM check the wires in the DRAM area ...
VDP speed curiousity
Score: 129.11 %,
Type: Forum topic , Comments: 111 comments
the red will show up in a strong tone when the WAIT is enabled, while it's mixed with blue (or black ...
OneChipMSX with HRA's emsx_top_20080502_003 firmware, at 10MHz
The black zones are fully The black zones are fully black. So this one no more is like the old issue when the test took more ...
Powergraph rev1 vs rev2 how can i find out
Score: 111.5 %,
Type: Forum topic , Comments: 16 comments
jailbars for a second and then black screen. I give up. We will see what the new light version will do. ...
