Search results
Curiosity about CS1 CS2 and CS1/2 in ROM SLOT CONNECTOR...
Score: 136.21 %,
Type: Forum topic , Comments: 8 comments
focuses onto the mapper circuit.
EDIT: or maybe when dealing with megarom PCB's /CS1, /CS2 ... to build a megarom mapper circuitry before accessing the EEPROM itself?
(For example I will be wanting ... already knew).
I assume that for a megarom mapped eeprom, again, like the one in the circuit, ...
Gamebank MSX Dumper V2 the PC MSX cartridge interface
Score: 134.87 %,
Type: Forum topic , Comments: 15 comments
and noticed there was a firmware update to dump megaroms.
A simple slot extender with A simple slot ... is mapper and the choices are: standard (no mapper), msx-dos 2, konami5 with SCC, konami4 without SCC, ... not suitable for someone who didn't know msx but obtained a rare cartridge. I also wish for more mapper ...
MSXdev’20: #17 – Anchors Aweigh!
Score: 160.79 %,
Type: News post , Comments: 22 comments
Game size: 160Kb (megarom, K5 mapper)
RAM size requirements: 16KB
Genre: Puzzle ...
MSXdev’20: #18 – Freedom Fighter
Score: 185.12 %,
Type: News post , Comments: 62 comments
BUT the real problem was that it didn't set bank 6 of megarom (necessary to play the intro ...
Name of the game: Freedom Fighter – Rise of The Humans
Game size: 128Kb (ASCII 16 mapper ...
ASCII16 mapper, no disk-rom! ASCII16 mapper, no disk-rom!
The v1.1 works on which MSX? The ...
Is possible getting back to sofarun from game launched?
Score: 135.95 %,
Type: Forum topic , Comments: 17 comments
but it's working on Megaroms!
Pentarou wrote:
I'm also
Pentarou wrote:
I'm ... GameRunner ]", but it's working on Megaroms!
That requires some hardware support, as MMC/SD ... it's me, but Google translation doesn't help much.
But in case of MegaROMs, wouldn't ...
RAM between slots 0-0 and 0-2
Score: 133.01 %,
Type: Forum topic , Comments: 15 comments
be loaded directly.
Of course, also megaroms.
Yes but the problem of RAM Yes but the problem ... and replace it by the slot 0-2 select signal
3/ Insert a Memory mapper cartridge MSX1 compatible and use ... any rom.
Yes, if you take the version with 512kB. MSX-DOS2/Nextor selects the largest mapper ...
pre-release of Megalinker: a linker to build of Megaroms for MSX using SDCC
Score: 330.9 %,
Type: Forum topic , Comments: 7 comments
Hi all,
I've been dealing with making megaroms using sdcc for the best part of the last ... I created linkers that enabled the creation of megaroms using sdcc, but they were quite limited. The ... be megarom, but don't know where to look really. Also, I use SDCC so this sounds just perfect (when ...
Running MSX AUDIO supported cartridge with NMS1205 Music Module
Score: 132.53 %,
Type: Forum topic , Comments: 52 comments
is a common MegaROM AFAIK... I don't think you can find anything unusual from inside.
NYYRIKKI ... the MSX-Audio BIOS mapper type? Since it's an FPGA cartridge that has received many updates and new ... GR8NET hasn't Eugeny told me GR8NET hasn't incorporated MSX-Audio BIOS mapper type ...
Philips VG-8020 and SD-512
Score: 139.45 %,
Type: Forum topic , Comments: 13 comments
MegaROM games with software like ExecROM or SofaRun if your MSX has another memory mapper
You need ... should launch several Konami Megaroms using the Memory Mapper. There is some slowdown in some games due ... Megaroms.
https://www.msx.org/wiki/Category:Flash_Cartridges ...
Strategies for 1 pixel vertical scrolling on 9918 VDP (MSX 1)
Score: 132.71 %,
Type: Forum topic , Comments: 54 comments
the nametable)=2208 bytes. Storing precalculated frames (even in a megarom) for such number of tiles means 30tiles x8 ... isn't enough... and my frames aren't precalculated, so they filled less room on megarom bank (16K ascii mapper). But consider that you have to add level map infos, attack pattern eventlist, bosses, ...
