Search results
loading msx-dos
Score: 88.41 %,
Type: Forum topic , Comments: 27 comments
http://bifi.msxnet.org/msxnet/tech/megaroms.html
MSX-DOS prior to version 2 works on MSX1 too.
(there's no MSX-DOS1 ROM btw, it only ... it should be mapper from offset 0x4000
but then I have 16KB which won't fit
where do I map that? ... or is there an msx-1 version if required?
Mappers use bankswitching.
- http://en.wikipedia.org/wiki/B ...
CF Cartridge from Sunrise
Score: 225.56 %,
Type: Forum topic , Comments: 21 comments
such a beautifull system as Msx is alive.
execrom will load megaROMs into a megaRAM, piece of Brazilia execrom will load megaROMs into a megaRAM, piece of Brazilian hardware, quite useful
Provided ... will it work anyway with my 512k internal expanded ram?
No, megaRAM has a different mapper system than ...
Sunrise CF IDe card and Panasonic A1WSX
Score: 172.42 %,
Type: Forum topic , Comments: 36 comments
Therefore you will need (next to at least 128K of memory) a MSX-DOS 2.x MegaROM cartridge to use MSX-DOS2 ... expansion and with an original MSX-DOS2 MegaROM cartridge , it works perfect and without problems! ... or IDE.
Like said, I have already Like said, I have already used an original MSX-DOS2 MegaROM ...
Checkmark 256/512 Kb memory mapper
Score: 224.74 %,
Type: Forum topic , Comments: 3 comments
with Megarom Games (usas, pennant race 2 etc..) Anyone familiar with this specific memory mapper!?!!?!
I ... that in mind.It's strange it would only give problems with Megarom games. Did you try other software with it? ... I bought an Checkmark (R & J Jansen) 256/512 Kb Memory Mapper. On the back of the original ...
SCC in subslot
Score: 91.97 %,
Type: Forum topic , Comments: 8 comments
http://bifi.msxnet.org/msxnet/tech/megaroms.html#konami
http://bifi.msxnet.org/msxnet/tech/scc.html
SCC is not I/O based but memory mapped ... slot/sub-slot don't matters.
I recall it contains memory mapper, and it is being accessed through ...
Multiple memory mappers in MSX system
Score: 231.44 %,
Type: Forum topic , Comments: 11 comments
an example... I guess megaram/megarom/scc memory mappers use other means to switch pages than fc-ff?
choise ... knowledge mapper works through ports 0FCh-0FFh, but can not figure out how to control multiple mappers ... the ports work with the mapper you have switched on the visible slot... if you wanna manage other one, ...
Test Memory in MSX
Score: 93.78 %,
Type: Forum topic , Comments: 22 comments
or sub-slot. The same goes for ROM mappers (MSX-DOS 2, MegaROM / SCC game cartridges, etc.)
Official ... 0x5000, 0x7000, 0x9000 and 0xA000, about different kinds of MegaROMs, 8K and 16K pages...
Probably you ...
TestRAM can test every memory connected to your MSX, being normal RAM, MegaRAM or Memory Mapper :) ...
HB-501P (MSX1) port I/O issue
Score: 111.04 %,
Type: Forum topic , Comments: 17 comments
I/O 0x98 hard coded won't work with it. All the Konami megaroms work with it, because Konami put ... Similarly, detect mapper by counting how many bits the mapper control register read back is just as sloppy. ... cases, may break everything on others.
How multiple (in parallel) mapper registers mask out when ...
Idea of RAM expansion cartridge
Score: 129.23 %,
Type: Forum topic , Comments: 25 comments
of MegaROM, first 4Mbyte of SDRAM could be managed with MSX-DOS 2 routines for memory mapped RAM, exceding RAM ... MegaROM there is no added value compared to any of the other devices. Someone else will want SCC, ... into the system and cart may be logically put into the subslot 1 in composite mapper modes (8-14, with internal ...
Death Wish 3 ROM conversion
Score: 127.33 %,
Type: Forum topic , Comments: 66 comments
@Eugeny
i manually erased the megarom an wrote the roms back to be sure i have the latest version. ... have been loaded by a megaROM emulator like SofaROM. Then things are a lot different. You can't ... than I thought! Here it is: http://www.gr8bit.ru/software/roms/venom{4}.rom . Mapper is ASCII-8 ...
