Search results
Manbow 2
Score: 158.62 %,
Type: Article , Comments: 14 comments
of the story from '89. Before we go into the pit however, let's start at the surface and go through ... in the reviewer's MSX turboR FS-A1ST and the lights are hit, the anxious wait to start playing begins. It's ... later, two options are shown: either start or continue a game. A two-player option would have been nice ...
Canon V-30F MSX2
Score: 158.57 %,
Type: Forum topic , Comments: 107 comments
The cartridge ports works fine (seller said game not starting).
But the Fdd does not work: ... did not Megaflashrom disk did not start if i did not press ESC key during boot (to disable the V30 ...
The drive and videoprint The drive and videoprint looks the same as in yamaha models.
Power ...
Dumping special format rom
Score: 158.34 %,
Type: Forum topic , Comments: 45 comments
"D4000#1" Super-X will give you HEX-dump of the memory area starting from #4000 slot 1... try if you can ... that Manuel can start work on openMSX:
Silver Reed SRDS (GCMK-128X) cartridge HW summary: ... MSX cooker or fishing rod
I'll start with it after the I'll start with it after ...
Emulicious major update released - now with MSX emulation
Score: 158.25 %,
Type: News post , Comments: 15 comments
here is the emulation. People wanted to get started using emulation (openMSX) but it was difficult to set everything up. AFAIK only one person was persistent enough to get everything running and started ... to see that after MSX Good to see that after MSX emulators started to emulate Sega systems, the other ...
State of RAM/ROM on boot with cartridge inserted
Score: 158.09 %,
Type: Forum topic , Comments: 149 comments
and power it on.
Page0= Bios in ROM
Page1= Start of ROM my cart
Page2= ROM still my cart
Page3= ... not exactly.
At boot time the MSX BIOS is switched on page 0 and execution starts at Z80 address 0. The boot code placed here sets RAM at page 3, performs some more initialization and then starts a loop ...
Update: V9990 Powergraph Light - New Batch for November 2018
Score: 157.77 %,
Type: News post , Comments: 53 comments
will still start sending !!
Thanks
Latok, your purchase was Latok, your purchase was confirmed by PayPal in 2018-02-06. We will start sending all Powergraph Light cartridges in March, 2018. Thanks ... wrote:
Maroca
This month we will still start sending !!
Thanks
Hi Rogerio,
Are you ...
SVI-728 5V problem
Score: 157.62 %,
Type: Forum topic , Comments: 5 comments
it almost immediately broked down. I played with it few hours and suddenly screen started to whirl and get ouf of focus. Then power went off and second later power came back on, but screen was whirling ... down again, and this time power never came back...
I measured PSU and readings from there was fine. ...
The cartridge you are waiting for 3000 years !
Score: 157.38 %,
Type: Forum topic , Comments: 217 comments
and real MSX and BlueMSX.
Montezuma doesn't start, it makes only strange artifacts on screen.
3 ... of pre-order is reach,
I started sending people interested an email with payment instructions. As soon as I ... it starts normally.
JungleHunt Hangs up after JungleHunt Hangs up after your logo !!!
while we ...
fMSX for Android released
Score: 157.31 %,
Type: Forum topic , Comments: 502 comments
powered devices.
I believe I started with 0.8 if I'm not mistaken. there was no disk support ... off. Speaking of which, sometimes when starting a new game the emulator temporarily forgets (some of?) ... Speaking of which, sometimes when starting a new game the emulator temporarily forgets (some of?) its ...
Make a Raspberry a real MSX.
Score: 157.28 %,
Type: News post , Comments: 105 comments
but still I get that "Shader not initialized" messages. THat starts after bluemsx says: Powering ... USB floppy disk support (/dev/sda or /dev/sdb)
Recently I've started to make a frontend ... that someone's starting on the hardware.
hamlet wrote:
Quote:
This is
hamlet wrote:
Quote: ...
