Search results
help needed with sv-738 fault
Score: 157.26 %,
Type: Forum topic , Comments: 15 comments
start?
Does CAPS led works as it should do?
Check the power from the power supply and the +5 and +12 ... led caps on all the time and relay clicks on start and power led is on.
any idea??
If ... by accident. The short is not enough to cause major drama, but prevents the machine from starting. So please ...
V9958 black and white picture
Score: 157.12 %,
Type: Forum topic , Comments: 13 comments
wish i had photos. Used crocodile clamps and with the machine on tested it until it worked.
Start with 1k then use 10k then 100k etc. 100nf for the cap is a good start.
I've tried numerous ... a little blue flash. This happen also when i power on the machine.
I've tested pin 22, 23 and 24 ...
Multipaint by Marq/Kameli
Score: 156.87 %,
Type: Forum topic , Comments: 15 comments
This happened to me under This happened to me under Linux aswell, workaround was to start ...
Multipaint is an powerful Multipaint is an powerful easy to use pixel art app, taking full advantage ...
Bug: Powerconnect in Openmsx detection?
Score: 156.38 %,
Type: Forum topic , Comments: 11 comments
pointed me is the same response.
keylog:
when started inserting the plug only the first 2 lines ... https://openmsx.dev/ but it’s quite a bit behind (so I started building my own).
Did I understand you correctly ... "0.15.0-636-g3c01256b9". In that case you are already using a development build
When i start this one in When i ...
Scc+ snatched card memory upgraded problem
Score: 156.31 %,
Type: Forum topic , Comments: 7 comments
,after placing it back and powering the msx it freezes because there is leftover data from the image
You can try removing the AB You can try removing the AB header from the ROM data and start the game without reset (using the start address in the header). It is normal for RAM to retain the data, ...
openMSX Remote control from DOS/Batch
Score: 156.24 %,
Type: Forum topic , Comments: 12 comments
instance it starts. But that's a C++ application...
Thank you manuel, but it's Thank you ... don't need Good point, if you don't need to change stuff after starting, you don't need ... it can command it on the fly, not only at start-up. It also is quite nice that allows anyone to create ...
MSXdev'20 kicks off!
Score: 156.18 %,
Type: News post , Comments: 79 comments
next iteration. Here's the official announcement for the start of the latest edition ... to repeat graphics, music or whatever but in my opinion it worth. Maybe 48KB-64KB is a better starting ... 'only MSX1' by taking measures to disallow even some kind of improvements when using more powerful ...
could You list all the pinball classics?
Score: 156.17 %,
Type: Forum topic , Comments: 57 comments
Mhz Z80 to simulate, but a new MSX pinball would be great!
I started with pinball fantasy 4PC ... know to be reliable when the shuttle programme started. In fact, the z80 didn't even exist back when the programme started. Over time the systems have been upgraden a few times. I think currently ...
8bits4ever presents the revolutionary EMUFDC!
Score: 156.17 %,
Type: News post , Comments: 44 comments
of Golvellius 2 it gets stuck after clicking ”start a new game”. Funnily enough, I have the same problem ... at start new game. With pressing Ctrl on boot (needs to be pressed for a long time), it works. ... powered!
TECH SPECS
Disk emulator running FlashFloppy firmware
1x MicroSD slot
1x 34 ...
FRS' patches and enhancements WIP - help needed
Score: 155.99 %,
Type: Forum topic , Comments: 204 comments
A>
Not starting
download hdd image here
www.vampier.net/thex2.zip
[quote]I ... but no other software was loaded before Firehawk. After reset it worked fine and intro starts after title. I ... you finish the stage-9? I'm starting to believe it's file is corrupted. The DSKs I have here ...
