Search results
FlashFloppy OSD is now available on MSX!
Score: 151.61 %,
Type: Forum topic , Comments: 6 comments
under the overhanging body. I started looking for a way to solve this problem and found a project ... adaptation for MSX, my Gotek was slightly modified - a pin header was soldered to the power connector ... the board inside with a not-so-thick double-sided tape:
Inside, you need to connect 3.3v power ...
Fixing Panasonic FS-A1 MK2 firmware issues
Score: 127.6 %,
Type: Forum topic , Comments: 35 comments
UI could be still started by holding one of the service keys (probably I will make it react ... with the programmed EPROM chip? I need at least 9 people to show their interest to start making the board ... is pressed during start. That routine is also into fs-a1mk2_cockpit3.rom so this part of 16kB can be filled ...
Simple diagnostics cartridge
Score: 140.75 %,
Type: Forum topic , Comments: 26 comments
bad during storage or at power-on. Diagnosing those problems usually starts from checking the power ... would like to start coding something like that once I find the time..
The thing with MSX architecture ... was trying to start, but at some point crashed and rebooted without showing anything on the screen. This ...
Carnivore2 announcements
Score: 168.39 %,
Type: Forum topic , Comments: 150 comments
have been added
Added files for supporting the emulation of Carnivore2 in OpenMSX (starting from ... now has the hardware-based interceptor for starting ROM images, but this feature is not yet used ... They allow to control the cursor in the main menu, start the games and configuration entries and also ...
Sony HB-F1XD booting to MSX-DOS issue - Floppy drive light on?
Score: 164.18 %,
Type: Forum topic , Comments: 17 comments
start troubleshooting?
Thanks so much!
Check if the smd caps on the Check if the smd ... not tested it on my Sonys yet, but the Panasonics ignore its existence.
hello, the logo starts up hello, the logo starts up very slowly, won't the Speed Controller be on?
vaj_Lehenak wrote: ...
Help with hacking msx roms
Score: 85.48 %,
Type: Forum topic , Comments: 27 comments
the fmsx version for my phone doesm't supports cheats. So I need a little orientation to start ... advice to start the hacking progress.
Can you lend me a hand please?.
Thank you!.
Whipon.
If ... a few tips to start the hack, because this plataform is unknow for me, and when I started to play some ...
Toshiba HX 22
Score: 93.55 %,
Type: Forum topic , Comments: 49 comments
starting up the ROM test as I described above. Bit 3 of port 82h in read mode is still not known.... what ... Manuel: that ROM procedure you started this thread with, is simple a test whether this is mechanism ... wordprocessor start and call comini give me Syntax error.
Thanks to your work, we now Thanks to your ...
Caution: Leakable NiCd Batteries inside your MSX
Score: 105.73 %,
Type: Forum topic , Comments: 16 comments
Manganese Oxide batteries did not yet exist. Li Mn O2 batteries started production somewhere around 1987 ... the time while it's not on the mains power. Those leaked and caused "XBOX fires".
They then pointed the finger to the power supply and power cords. (as scape goat, to save face)
The second ...
Internal of several MSX Computers: Canon V-8, V-10, V-20 / Toshiba HX-33 / YASHICA YC-64 / PHILIPS VG-8020/19
Score: 109.82 %,
Type: Forum topic , Comments: 40 comments
resource indeed!
However, without knowing something about the ROMs, it's hard to start using ...
CANON V-8:
Width: 309mm
Depth: 214mm
Height: 43mm
Weight: 1440g
All have external DC Power ...
Repurpose Sega Master System RGB upscaler to MSX
Score: 174.12 %,
Type: Forum topic , Comments: 27 comments
the RAD2X surely an MSX can too. I would still start with a conversion cable from MSX pinout in male ... that, since the rad2x is based on the retrotink2x, it also has to get its power through the connector somehow. You may want to double check whether the msx can provide this power without problems ...
