Search results
Using Carnivore 2, Nextor and SofaRun
Score: 138.74 %,
Type: Forum topic , Comments: 48 comments
that wasn't enabled, that can prevent this when the FPGA isn't fully started yet.
2. Is the bootmenu ... "Settings" instead of "Start". Each setting can be applied by default or per-game.
About ... get the 1st blue screen from the game "Press any key to start / do not sell".... ...
Using openMSX with GFX9000
Score: 117.8 %,
Type: Forum topic , Comments: 40 comments
to start the MSX session, but it looks those are commands that i can type manually somewhere? I'm ... private storage share. After starting MSXDOS, please start symgfx9k.com.
Sunrise IDE Image ... for the CPC in SymbOS people will start developing games for it. And maybe the interest will be higher after ...
Uwol, Quest For Money
Score: 138.09 %,
Type: News post , Comments: 22 comments
makes it very easy to get lost and go back to the starting point. That’s what happened to Uwol: his ... pajamas, the Sword of Power (just a copy, ‘cause the real one is in use), heaps of Saimaza coffee…), he ...
V9938 -> V9958 upgrade problems
Score: 94.39 %,
Type: Forum topic , Comments: 15 comments
test both. Take a capacitor. test both. Take a capacitor. Lets say you start with 220nF then add ... wasn't aware of that. So you can either clean up the sync signal by adding a filter or free the power ...
V9938/V9958 to TMS9918/29 PCB adaptor
Score: 96.66 %,
Type: Forum topic , Comments: 52 comments
a disk drive built in. Starting with an MSX1 that's a lot of stuff to add/rebuild before you can run a decent selection of MSX2 software. Simply starting with an MSX2 is much easier and not that expensive. ... When I started, I didn't even want to write *any* HDL (I didn't even know an HDL). In ...
V9958 black and white picture
Score: 157.12 %,
Type: Forum topic , Comments: 13 comments
wish i had photos. Used crocodile clamps and with the machine on tested it until it worked.
Start with 1k then use 10k then 100k etc. 100nf for the cap is a good start.
I've tried numerous ... a little blue flash. This happen also when i power on the machine.
I've tested pin 22, 23 and 24 ...
V9958 Color Bus
Score: 90.22 %,
Type: Forum topic , Comments: 44 comments
to write before the VDP starts doing something useful. Once you have VDP initialization working, ... it takes some time, as I sta @PingPong: I will. But probably it takes some time, as I start from ... a @PingPong: I will. But probably it takes some time, as I start from scratch. During the last evenings I ...
V9958 Problems, screen flickers.
Score: 160.45 %,
Type: Forum topic , Comments: 14 comments
it starts to flicker?
if heated too little, the flashing starts after about 60 sec if heated too little, the flashing starts after about 60 seconds to boot.
Thanks for the advice.
so it did ... supply normal is 5.10v 5.20v
If the problem is the power supply, voltage is 4.7v - 4.8v I If ...
V9958 replacement
Score: 141.18 %,
Type: Forum topic , Comments: 33 comments
impossible to re-start the command exactly when is was interrupted.
it would have required to change also ... execution after stopping it. the reason is that the vdp works in a way that make impossible to re-start ... powerful professional configurations too, including video editing appliances like the Sony XV-T550 ...
V9990 is not part of MSX
Score: 143.34 %,
Type: Forum topic , Comments: 132 comments
Metal Dragon MSX (Z80) .
I hope someday KAI starts to sell it as a digital game. I can only run ... that people will always complain and start bashing the VR's / MSX3's and so on... Just let's ... a certain style. Maybe the MSX3 can marry modern power pies with the characteristic '80s computer ...
