Search results
Can I use a regular PC power supply in my 8250?
Score: 226.32 %,
Type: Forum topic , Comments: 13 comments
the power button on the msx your
power supply will start.
Now you take a voltmeter and check the voltage ... Hi!
Since my trusty NMS 8250 MSX2 falls apart by just looking at it, I started to rebuild ... find a SCART cable so I have no picture yet, but I put in a gamedisk and it started to load just fine. ...
Can this be done to wait VSYNC?
Score: 100.29 %,
Type: Forum topic , Comments: 18 comments
With this one, if loop period is lesser than v-period it waits, if greater then starts the next loop ... not generate more than VDP interrupt when powered on. ie. to enable tR MIDI-interupts, you have to execute CALL ...
can't get AYFX to work
Score: 127.67 %,
Type: Forum topic , Comments: 38 comments
por mí ***
;inc a ; Starting channel (=1)
;*** Comentado por mí ***
ld a,3
ld ... don't start the new ayFX stream
; --- Set new priority ---
ld a,c ; a:=New priority
and $0F ... starting point if looping
afxChData: ds 3*11
END_DATA_AREA: ;$
; endmap
TonA: EQU 0 ...
Can't get Melancholy SD-Snatcher disk running
Score: 108.17 %,
Type: Forum topic , Comments: 6 comments
bar, and for a second, it started accessing my FDD... but then the drive light shut off, and I was left ... sound cartridge and disk 1, then powered on my system.
I got a screen that said it detected SCC+ ...
Canon V-30F MSX2
Score: 158.57 %,
Type: Forum topic , Comments: 107 comments
The cartridge ports works fine (seller said game not starting).
But the Fdd does not work: ... did not Megaflashrom disk did not start if i did not press ESC key during boot (to disable the V30 ...
The drive and videoprint The drive and videoprint looks the same as in yamaha models.
Power ...
Carnivore 2 Software update
Score: 164.18 %,
Type: News post , Comments: 16 comments
this default configuration is started, the Boot Menu remains in the primary slot, allows the system to start ... no longer does the BIOS ROM shadowing and therefore starts faster
The Boot Menu's data section has ... internal version in the configuration registers (3 bytes) in ASCII format (only starting from v2.30) ...
Carnivore 2 troubles in Yamaha CX5MII/128 upgraded to MSX 2
Score: 131.45 %,
Type: Forum topic , Comments: 34 comments
I moved along inserting C-2 into slot. The cartridge did start to menu screen, but selecting any ... starting default config (the only one I have now), and CX5M still does not boot to MSX-DOS. The last thing ... with occasional differences in the lower part, and completely different starting at address 0x36d5.
I will try ...
Carnivore 2: c2man does not find cartridge
Score: 126.95 %,
Type: Forum topic , Comments: 75 comments
happens when Carnivore2 has the game/software ROM with the call-based start launched. You will not see ... the game/software ROM with the call-based start launched. You will not see the boot block in this mode either. ... auto-detection after starting from the DefConfig and also on the double-restart feature for the cold boot (to ...
Carnivore2
Score: 117.95 %,
Type: wiki , Comments: 0 comments
switching support
Supports entry's auto-start with timer
Allows to run 2 ROMs at the same time ... power-off)
FlashROM: 8MB (64Mbits)
Fast Writing
first 256kb used for service areas and BIOS ROMs
Mapper ... speeds
Powered by a FPGA (EP2C5Q208C8 Altera CYCLONE II)
Uses proprietary software to manage all ...
Carnivore2 : First impressions and bugs...
Score: 227.96 %,
Type: Forum topic , Comments: 537 comments
Games might have slowdowns in memory mapper mode at start (time for everything to be cached), and some ... with Manbow2. It starts, shows a demo, but doesn't go into the game mode. Can someone please try ... you connect the cable correctly!)
10. Click "Start" and monitor the programming ...
