Search results
Cheap RGB to Video converter for vintage computers
Score: 104.92 %,
Type: Forum topic , Comments: 42 comments
Thanks Timo, I will keep this Thanks Timo, I will keep this project in mind when starting mine... ... (Select). The wire should be connected to power for 4FSC mode (14,3 and 17,7 mHz) or to be connected ...
SV 328 repair
Score: 134.26 %,
Type: Forum topic , Comments: 17 comments
you order as replacement 4116's?
I would start by replacing I would start by replacing ... But first thing is check their power supply voltages. Take any of the 4116's. Hold black wire ... are outside +- 5% of that, power suppy needs fixing first.
Often the VDP is socketed. If so, remove & ...
F4/FMPAC Light Combo Board project
Score: 116.61 %,
Type: Forum topic , Comments: 190 comments
of them, I'll also ask from Ahti/STT. I started to wonder if the board is small enough to fit on place ... that the Yamaha It appears that the Yamaha SFG module's bios can't be started with "call ... I've used command CALL MUSIC and to start SFG internal software, I've used command CALL MUSICA ...
FDD+IDE controller and Universal Flash ROM cartridge projects + future Multi-soundcard cartridge
Score: 136.23 %,
Type: Forum topic , Comments: 157 comments
What kind of tools? Our tests were mostly for the normal usage of the cartridge. This means starting ... mostly for the normal usage of the cartridge. This means starting the computer with different settings ... yet. The manufacturer is assembling the test batch. That's all I know.
I started to create ...
SFG-01/05 module clone
Score: 115.14 %,
Type: Forum topic , Comments: 89 comments
to be completed before we start the SFG clone's implementation as physical hardware.
The ... jotego,
nice to meet more Yamaha user around, as the powerful synth was always a poor cousin ...
Small board for diagnostics or game cartridge
Score: 113.89 %,
Type: Forum topic , Comments: 20 comments
great if you could start something like that :) !
I have some suggestions in mind on top of what ... power and has completed the RAM test at least. That way you will know something in case ...
Why not put a few LEDs, or a seven-segment display on it to indicate it has power and has completed ...
It's time to create a proper diagnostics software for MSX
Score: 114.1 %,
Type: Forum topic , Comments: 16 comments
for their MSX's Test cartridges.
For testing a MSX where to start ? Check the power supply.
Reset first ... had for their MSX's Test cartridges.
For testing a MSX where to start ? Check the power ... assumptions), at least if the testing software can be started. But I'm pretty sure that if the cartridge ...
Very old project completed! Commodore's datasette + MSX work together
Score: 119.6 %,
Type: Forum topic , Comments: 5 comments
time...
It all started a long time ago in a galaxy far.... well, it actually started in Finland ... inside MSX. Starting and stopping the motor on demand was a cool feature. The only problem was that I ... what happened next. I took out the device from its box and started to look at the schematics. My yet ...
Casio PV-16 - doesn't start
Score: 267.46 %,
Type: Forum topic , Comments: 6 comments
(already fixed), the other - PV-16 doesn't start at all.
The CPU frequency, Reset signal and power are OK. The data and address signals on the CPU board are working fine. I found out ...
Socketed the VRAM and Socketed the VRAM and resocketed the VDP. Now the machine starts! So I presume ...
Side slot adapter for Gotek emulator and floppy drives, usable in YIS503, CX5M, CX5MII and similar MSXs
Score: 122.1 %,
Type: Forum topic , Comments: 30 comments
by Igor Bocharov) is started. Then I swap the disk image and run the 8-file Girly Block game directly from ... connections for a floppy drive. There's a cover with the interface and power plugs that can be installed ... The power is supplied by the Molex connector with the wires soldered onto the board (to the floppy ...
