Search results
SymbOS MSX multitasking operating system - help needed!
Score: 253.81 %,
Type: Forum topic , Comments: 3980 comments
Hi,
now I think it's a good idea to start an own thread for this project.
First ...
http://www.msx.org/forumtopic5436.html
http://www.msx.org/forumtopic6197.html
Yesterday I started to work on the MSX ...
CU,
Prodatron
One to get you started. It should still be optimised. For on One to get you ...
Sprite Corruption / Graphic Artifacts ?
Score: 151.33 %,
Type: Forum topic , Comments: 12 comments
a couple of errors / inconsistencies. The SPACEMAN.BAS file however is what i initially started with found ... understanding of MSX Basic.
Ive started to download all the MSX Mosaik Magazines and notice that issue 1 ... power led does not always light or is not very bright so with a few sharp taps it will come on so likely ...
Sony HB F1 II with picture out.
Score: 151.59 %,
Type: Forum topic , Comments: 2 comments
the machine and don't see any noticeable leaks. I can start pulling all the caps and testing them ... I have a HB F1 II with the picture out from what I remember when I last had it powered on. It had a Clock mod done to it and a Stereo audio mod that I removed when the system picture went out. I ...
Request a wiki
Score: 138.47 %,
Type: Forum topic , Comments: 165 comments
there are cases where it is needed much more than just a snipet
I'm not sure one can start that far ... the displaying issue of items in lists when we are not connected would be a good start before changing anything. ... Slot map, power supply, etc). And it's better to keep the same way of doing everything ...
Goteks with new "guts"
Score: 140.55 %,
Type: Forum topic , Comments: 20 comments
Looks like the time of Goteks with STM32 chips is coming to an end. The Chinese sellers started ... the firmware from starting before connecting the USB cable to the Gotek.
The FlashFloppy 3.24 firmware ... the Boot (J3) jumper and to connect the power to its power connector (or you can reconnect the USB cable ...
CASDuino recording functionality
Score: 170.89 %,
Type: Forum topic , Comments: 58 comments
started thinking about the I started thinking about the recording function when I saw the Sofacas program. This uses the Goertzel algorithm to decode the data. Not knowing what that was, I started reading ... as a 32 bit multiply and it will be too slow... With no solution available in C, I started looking ...
Victor/Jvc hc-95
Score: 111.27 %,
Type: Forum topic , Comments: 103 comments
if necessary. Maybe other HC-95 owners can help with pinout / cabling info?
I'd start ... so much RetroTechie!!! You're the man!
Let's start for the most interesting (for me) ...
Starting a game that loads as files from floppy, is just a matter of something like
10 RUN ...
Sakhr AX-370 Cartridge Problems
Score: 151.07 %,
Type: Forum topic , Comments: 11 comments
the YRM-104 or YRM-504 FM Music Macro Cartridges produces a black screen even before any MSX start screen ... logo, has me puzzled. I almost think it is an electrical issue of some sort. Is the power light on when ... corner into the black screen, but the power on led is on and you can also switch the reset button. ...
Konami development tools revealed
Score: 109.95 %,
Type: Forum topic , Comments: 55 comments
clock mode (which would seem a logical thing to do), the MSX inserts an M1 wait cycle at the start ... an M1 wait cycle at the start of each instruction, which makes it ~10% slower than a plain Z80. If ... cycle in at the start, you go from needing a memory subsystem than can respond in two cycles but only ...
What modern monitor can work with V9990 power Graph
Score: 288.87 %,
Type: Forum topic , Comments: 28 comments
to create my own cables... that would be a disaster ;-)
So, before I start spending my money again, I ... Hi ya all,
I've got a V9990 power graph light by Technobites (Brazil) over here. ... of the PowerGraph light is the same as the OCM and derivatives. Basically the original VGA pinout but with CSYNC ...
