Search results
SX|2 Available again!
Score: 141.17 %,
Type: Forum topic , Comments: 34 comments
to start from scratch... Once those Cyclone V prices go lower, we are going to see a lot of custom FPGA ... Poker will boot to the title screen and then freeze (starting with single disk games) then tried ... that is not really powerful)... More recent FPGAs (and also, way more expensive) have dedicated hardware for USB host ...
Crystal clean PCM 8bit samples on the poor PSG
Score: 102.33 %,
Type: Forum topic , Comments: 133 comments
ORG 100h
START:
di
PsgW 0,255
PsgW 1,255
PsgW 2,255
PsgW ...
;-------------------------------------
; IN HL - Encoded sample start address
; HL'- Sample length (#pcm saples) ... file can vary. If you start from 8bit PCM in the worst
case the RLE expand the result to 1.5 -1.6 ...
Platformer Suggestions ?
Score: 151.03 %,
Type: Forum topic , Comments: 18 comments
out that the only way to go into smooth territory asm becomes a must. I started building a platformer ... enemys, various types of loot or power-ups inc extra lives. Various different levels with ladders, ropes, ...
The Caslink3 project has been released!
Score: 148.36 %,
Type: Forum topic , Comments: 40 comments
to handle files starting from various tricky addresses
- File format recognition routines have been ... space and allow a 24kb file to be fully loaded into available RAM
- The small ROMs starting from 0000h and above 8000h can now survive the reset - the "AB" signature and the ROM's start address ...
MSX suddenly died - Garbage on screen
Score: 153.95 %,
Type: Forum topic , Comments: 4 comments
voltage Sometimes those old voltage regulators give up and start putting way more voltage onto power ... blue. With a cartridge, it shows garbage, makes sort of a "ding!" sound and starts showing ...
ZX Spectrum games ported to MSX...
Score: 161.03 %,
Type: Forum topic , Comments: 64 comments
of the increased bandwidth.
Can anyone tell me the games Can anyone tell me the games that started from ... that were released simultaneously on multiple platforms and one that didn't start from MSX eg Nemesis ... contemporary official port? I also want to know if any title comparable to Manic Miner and Jetpac ever started ...
Hello. Newbie on the MSX-scene with some obvious questions(?)
Score: 195.21 %,
Type: Forum topic , Comments: 11 comments
start with it.
I am also relatively new to I am also relatively new to the MSX scene and can ... and the people in the forum a happy to give advice.
I will give it a start: as you said that you are coming ... to said floppies, but since I can only power one of them up at the time, due to lack of PSU for the 707, I ...
openMSX bugs
Score: 135.87 %,
Type: Forum topic , Comments: 143 comments
from another file than the particular ROM you're loading.
Can you start up without any ROM?
Manuel wrote:
Can you start
Manuel wrote:
Can you start up without any ROM?
No, as I wrote in my previous message : no other ROM is starting either.
They ALL give me the same error ...
Different behavior between Megaflashrom SCC+/Nextor on a turbo R and MSX2
Score: 151.48 %,
Type: Forum topic , Comments: 16 comments
put breakpoint onto address 0100h, and see the slot configuration on the COM application start. I ... that boot. If you power cycle the MSX the RAM will be enabled again.
ok, thanks, small update it ok, ...
MSX2 Philips VG-8235 - cable adapter for GOTEK DD
Score: 152.75 %,
Type: Forum topic , Comments: 15 comments
this screen after start (MSX logo is fine):
Any idea what this could be?
plxbollo wrote:
It shows this
plxbollo wrote:
It shows this screen after start (MSX logo is fine): ... The SUBROM has default values for the VDP registers starting at address 0x29f6. You want to change ...
