Search results
DEMOs
Score: 151.4 %,
Type: Forum topic , Comments: 53 comments
the horizontal resolution of a vdp screen mode?
Now, start to use your time to code and let me see a 512x212 ... you will start blaming spectravideo?
PingPong wrote:
that is the point : most cpc ... you will start blaming spectravideo?
Cost/time constraints? MSX is not an incredibly ...
SFG Cartridge by RBCS Parts Question
Score: 152.45 %,
Type: Forum topic , Comments: 12 comments
to flash the SFG successfully. It starts the SFG software but I hear air noise. I noticed I have one ... China. I sourced out another one from trusted source.
When I start the SFG using the command Musica, ... on F5 and the beat starts and I can change around the settings and I can hear more sounds.
My ...
Eprom Cartridge Rev 1.5
Score: 143.8 %,
Type: Forum topic , Comments: 36 comments
into the EPROM and see if the game starts. MSXDIAG does a lot of checking before it actually shows anything ... with the testram binary and another with the MSXDiag but no luck. Cannot start any program from the cart slot. Any ... would have caused a short circuit between power 5V supply and ground.
Hi,
Thanks you for your ...
MSX HDMI mutlimedia card
Score: 113.94 %,
Type: Forum topic , Comments: 568 comments
is about 15$ at a quantity starting from 30.
For 3 protos, I have payed per card: 45$ components+50$ per ... you have a hit in your hands, if you'll start selling this!
I still don't quite ... oven reflow required).
I could propose, however, to start with Procyon, and if it becomes too ...
HX-10 black screen/no composite
Score: 155.21 %,
Type: Forum topic , Comments: 3 comments
should start looking?
I would look at the breakout I would look at the breakout board ... a good place to start.
Swapped the breakout board Swapped the breakout board with another ... of interferance) and I get no signal via composite.
Power light is lit, and caps lock light works. ...
Z80 protected mode?
Score: 153.52 %,
Type: Forum topic , Comments: 21 comments
in the Z80 CPU itself. And showing an MSX machine at the start is misleading, since what he's doing ... of a protected mode is that those early processors have too little horse power to efficiently support ... and it's exceedingly common in old 8-bit embedded systems. Very little power is required ...
MSX Wings, port of a famous 90's game/MSX 2+/SC11 (Demo/WIP/POC)
Score: 145.19 %,
Type: Forum topic , Comments: 76 comments
colour bars. The green bar is the time used by the CPU in the frame. VDP starts working in parallel ... and if the game detects a 2+ the screen 11 version could be started (or maybe make 2 different releases). But yeah ...
A thought that has been in my mind for a while is that, I think a powerful way to use the MSX2+ YJK ...
FlashFloppy OSD is now available on MSX!
Score: 151.61 %,
Type: Forum topic , Comments: 6 comments
under the overhanging body. I started looking for a way to solve this problem and found a project ... adaptation for MSX, my Gotek was slightly modified - a pin header was soldered to the power connector ... the board inside with a not-so-thick double-sided tape:
Inside, you need to connect 3.3v power ...
Auto-generated map for Metal Gear 1
Score: 127.01 %,
Type: Forum topic , Comments: 20 comments
everywhere anyway to make sure I'm not missing important objects.
I also started to make ... engineered quite some parts of the game.
Hidden power switch: ...
Anyone running a server for Gr8net?
Score: 137.03 %,
Type: Forum topic , Comments: 99 comments
folders. But when i try to start rom, most of them make "Cannot parse URI" error, only a few start. I guess it might depend on the filename length. F.e. Halnote started but Hacker (Activision) ...
Pencioner wrote:
Now it works somehow
I can browse folders. But when i try to start rom, most ...
