Search results
Arkos Tracker 2 and MSX Basic compiler
Score: 157.66 %,
Type: Forum topic , Comments: 13 comments
in RAM, allocating a lot of memory resource and processor time during it. The former, instead, compiles ... of RAM for running as Cartridge without resources;
* 32kb of RAM for running as Cartridge with resources;
* 64kb of RAM for running with ExecROM (for 32kb ROMs) or ODO
(for 48kb ROMs) ...
Panasonic 2+ A1WX: problems enabling Z80 Turbo mode
Score: 179.67 %,
Type: Forum topic , Comments: 10 comments
be causing that, where to look for issues?
Thanks in advance
Speed rating of the ram Speed rating of the ram memory chips used?
Have you tried to enable the Have you tried to enable ...
It happened when it had 512K of RAM, then it continued happening when the technician downgraded ...
need help: yamaha floppy disks interface fd-501
Score: 142.1 %,
Type: Forum topic , Comments: 13 comments
(which were not originally released on floppies), might need more RAM. Again it's the same thing - ... more RAM than (again) MSX1 machines have. So you need an MSX with big enough memory mapper (RAM) to run ... with GND
what pin is ?is it pin 34 to GND ?
i tryed some games but didnt i tryed some games ...
Yamaha SRE-01 - 32K RAM/Expansion Slot Unit can be upgrade?
Score: 261.56 %,
Type: Forum topic , Comments: 13 comments
https://www.msx.org/wiki/Category:RAM_Expansions
oh to bad . so is there any oh to bad . so is there any way to upgrade one of those machine ram?
You can use this adapter for You can use this adapter for the ax100: (Ask to Alexey) ... of those machine ram?
They are all MSX1 machines, so they are all limited to 64kB. The Sakhr AX-230 ...
Which MegaFlashRoom for my MSX2 Philips MNS 8280
Score: 138.84 %,
Type: Forum topic , Comments: 21 comments
at the top. Have the version with 512K extra RAM and you have quite a powerful MSX2 there.
Carnivore 2 ... with an additional 512K of RAM, do you recommend the one with one or two SD slots? thank you
I own two ... really experienced any sound issue worse than using a normal Konami SCC game. I choose not to have ...
Loading games into my MSX2
Score: 229.22 %,
Type: Forum topic , Comments: 17 comments
is being loaded off of a floppy disk, the entire game is loaded into RAM, and basically held there -- ... on a 128kB ROM cartridge, and unless you upgraded it, your Philips NMS8280... has 128kB RAM. So after simply reading the game from the disk, your computer's memory is already full -- there's no RAM left ...
FM-Pack cartridge for my MSX2 Philips NMS8280
Score: 157.67 %,
Type: Forum topic , Comments: 80 comments
panel to adjust volume controls, PSG, SCC, and FM-PAC, and additional banked RAM.
You can load ROM ... characteristics of The characteristics of Carnivore2 indicate SCC and SCC +
Can be configured as RAM ... shows these roms as well as the default entry which includes IDE, RAM, SCC and FM-PAC. The IDE part ...
Msx 1 software sprites
Score: 113.44 %,
Type: Forum topic , Comments: 18 comments
with the fastests routines that can be used in these RAM based machines like "stack-blasting".
A game ... to the VRAM through ports; but it can be compared with the fastests routines that can be used in these RAM ...
I fear that pre-shifted tiles I fear that pre-shifted tiles will take a huge amount of ram when ...
ROMU6 V2
Score: 109.22 %,
Type: Forum topic , Comments: 18 comments
From ZxSpectrum Driller Tank From ZxSpectrum now Converted to MSX (FDD and 64k RAM Required) ... Cavelon Ocean 1984 ZxSpectrum now Converted to MSX (FDD and 64k RAM Required) via FUSE modified for .S81 ... are loaded... that means I can load any original 48K Spectrum game cassette into MSX, that sounds great! ...
Snowclimber recompiled
Score: 99.32 %,
Type: News post , Comments: 3 comments
Challenge. Andrea Rossetti has now recompiled the game to make it BLOADable on MSX machines with less than 64kB RAM.
On his Snowclimber page, Andrea reveals in depth the why and how of this recompilation. You can also download the game in BLOAD- or WAV-format there and get the modified source code. ...
