Search results
Arabic Keyboard Layout on none Arabic MSX BIOS and SubRom
Score: 186.65 %,
Type: Forum topic , Comments: 2 comments
I am new in the world of modification for MSX. I recently converted Yamaha YIS-503II Japanese to MSX2+ Russian with the help of Alexey from RBSC.
I have good skills in soldering (thanx to this project of conversion), can read schematics, and ...
Sanyo PHC-70FD PCB Pictures
Score: 188.2 %,
Type: Forum topic , Comments: 4 comments
Can I anyone who owns this device upload high quality picture of the front and back PCB?
I do have the equipment to I do have the equipment to shoot some but a lack of time atm. Give me a ping in two months, if you don‘t get some through ...
Yamaha 503II Keyboard some buttons issues
Score: 188.04 %,
Type: Forum topic , Comments: 9 comments
if you press stop X4 becomes active and only Y7 should be active but it seems Y0-Y8 all become active (these signals are passive high apparently so the actual thing in the MSX will be that the go to 0 ... if you press stop X4 becomes active and only Y7 should be active but it seems Y0-Y8 all become active ...
Chinon FZ-357 Floppy Drive " Not Ready" on AX-370
Score: 188.87 %,
Type: Forum topic , Comments: 5 comments
DS0
- MM
-TTL/C-MOS
By default it also had a jumper set for the RDY signal, which I had ...
Which jumpers are set? For my Chinon FZ-354 I had to set the following jumpers:
- DS0
- MM ... had to set the following jumpers:
- DS0
- MM
-TTL/C-MOS
By default it also had a jumper ...
Resistors, Capacitors and Inductor values of SANYO WAVY 70FD
Score: 189.11 %,
Type: Forum topic , Comments: 3 comments
Does anyone know the values of the following resistors, capacitors and inductors from SANYO WAVY 70FD? Or at least can measure them for me from their machine.
I put the resistor numbers in order according to the proximity of each others
Just ...
AX-370 Black Screen with RTC ROM
Score: 189.72 %,
Type: Forum topic , Comments: 11 comments
Recently, I had black screen upon turning on my Sakhar AX-370. I troubleshooted it and I can verify the following:
- Turns on and run all the way normally using CBIOS ROM without any problem
- Turns on and run all the way normally using MSX1 ROM ...
Sanyo Wavy 70FD, L105 inductor picture or value NEEDED
Score: 189.93 %,
Type: Forum topic , Comments: 11 comments
Can someone who owns this machine tell me what is the value of the inductor at L105? A clear picture of the inductor will also help.
I hope someone is willing to help.
I can make a photo when I get I can make a photo when I get back home ...
This is how to change RAM slots assignment on Sanyo AX-370 and 70FD
Score: 190.44 %,
Type: Forum topic , Comments: 2 comments
On the AX370, the RAM is assigned to slot 3-3, if one would like to change it to slot 3-0 (just ... that you will move the RAMS from slot 3-3 to 3-0.
R112 (10K Ohm) is for Slot 3-3
R236 (10K Ohm) is for Slot 3-0
I don't if that is helpful or not, but for me it was since I want to slot 3-3 ...
Sanyo 512KB PCB on AX-370 Issue
Score: 189.09 %,
Type: Forum topic , Comments: 9 comments
I got the board and built it up. I connected all the 4 chips to the 4 slots that are available on the MSX PCB but I am not sure if that's the right way to go since there was not a lot of instruction on the gerber file except about the A8 (pin 47 on ...
FMPAC has stopped working on my Carnivore2
Score: 191.49 %,
Type: Forum topic , Comments: 8 comments
I was trying to play some FM files and I got an error syntax at line 10. Tried. I will try to update it later, it may fix that issue when installing the new file. But, any recommendation is welcome.
Maybe your flash chip has Maybe your flash ...
