Search results
Has the msx cartridge size ever been changed ?
Score: 123.97 %,
Type: Forum topic , Comments: 5 comments
Reading the msx technical data book, the cardridge size which enter the msx must be 109mm x 16.8mm.
When i'm measuring the actual cardridge size for the one i've got over here, i do find out that the sizes go up to 109.4mm x 17.6mm ?
It ...
MGSEL or MGSDRV program
Score: 127.02 %,
Type: Forum topic , Comments: 20 comments
Does anyone know if this program is still supported by a programmer ?
Possibly i found an error within this program and i would like to verify it with the sources.
It would also help if someone has the sources of the mgsdrv ?
Thanks.
...
I/O map for the Sharksym Sd-Card ?
Score: 123.18 %,
Type: Forum topic , Comments: 3 comments
in the gaps ?
0x6FE0 -> 0x6FFF wr_out = D0
MMC1PIN1 = D1
MMC2PIN1 = D2
0xAFE0 -> 0xAFFF Flag = not D0
0x6FE0 -> 0x6FFF WR_MMC = '1' write to outside this area will cause WR_MMC to reset to '0'
0x5000 -> 0x57FF Set ...
Joystick connectors on new MSX ?
Score: 123.08 %,
Type: Forum topic , Comments: 15 comments
If someone would develop a new MSX compatible platform,
would you still like to have the two joystick ports on it, or can you life without it ?
Which of the following options do you like ?
-None at all, i can life without it.
-I would like ...
Cartridge slot location on new MSX ?
Score: 123.27 %,
Type: Forum topic , Comments: 25 comments
If someone would develop a new MSX compatible platform,
at which location would you like to see the extension slots ?
-None on the platform but in a separate housing connected by means of a cable ?
-One on the from and one on the back ?
...
Is the copyrights on the Z80 still valid ?!?!?
Score: 123.25 %,
Type: Forum topic , Comments: 9 comments
Does anyone know if it is legal to make a Z80 binary compatible CPU and sell it ?
Ask zilog. Ask zilog.
Correct me if i'm wrong, but you can create a compatible CPU Correct me if i'm wrong, but you can create a compatible ...
Command2.com version 2.4 update ?
Score: 122.95 %,
Type: Forum topic , Comments: 6 comments
I would like to update to the new command 2.4 version but for some reason is the installer disliking my current version
I've got the following dos version installed on my OCM:
version .sys: 2.30
version kernel: 2.31
version .com: 2.31 ...
Soundmodule for sale Roland-SC55 on marktplaats
Score: 122.84 %,
Type: Forum topic , Comments: 25 comments
http://www.youtube.com/watch?v=jimm2Rzard0
Yeah, I've seen it already, very nice! Thanks for the advise Yeah, I've seen ...
What happened to all those MSX2INPC cards from Philips ?
Score: 133.46 %,
Type: Forum topic , Comments: 15 comments
I can remember that Philips did create a PC card with a msx2 on it, but for some reason i'm not seeing them around anymore ?
See: http://msx.hcc.nl/archief/msx/foto09.html
one was sold 2 years ago in Nijmegen
one was sold 2 ...
Anyone ever tried a floppy emulator inside an MSX ?
Score: 122.78 %,
Type: Forum topic , Comments: 16 comments
www.ipcas.com/products/usb-floppy-emulator-fdd-to-udd.html
Did anyone ever tried to replace their msx floppy-drive by a floppy to usb stick emulator ?
For 249 euro? I doubt it. Nice stuff though. For 249 euro? I doubt it. Nice stuff ...
