Search results
MSX Instagr8 - Instagram for MSX1
Score: 138.17 %,
Type: Forum topic , Comments: 34 comments
my test video here -
https://www.youtube.com/watch?v=UpsfpYPpWDk&list=PLlD0W14KLT...
I ...
8bits4ever
Score: 138.08 %,
Type: Forum topic , Comments: 6 comments
Does anyone know if 8bits4ever is shutdown due to COVID?
no, I don't know nothing no, I don't know nothing about it
I don’t think they have, they I don’t think they have, they have even upgraded the shipping to UPS/DHL ...
Hardware repair needed
Score: 137.88 %,
Type: Forum topic , Comments: 14 comments
So it's confirmed. I've got a motherboard hardware issue in my 8250. Slot 1 has a very bad contact with the motherboard. Sometimes the cartridge stays unseen, sometimes something happens but hangs, sometimes it more or less works.. When I put ...
Zemmix SD kaart
Score: 137.99 %,
Type: Forum topic , Comments: 9 comments
https://www.konamiman.com/msx/nextor/docs/Nextor%202.0%20Use...
32 GB SD card
I want to make 32 GB SD card
I want to make 3 or 4 partitions: MSX1, ... maken van 4GB/partitie.
Hoe krijg ik dat voor elkaar, en moet er op de SD ook nog iets staan, ... https://www.msxinfo.net/download/manual-zemmixneo-en-pdf/
if it is MSXDOS 2, yes it needs msxdos2.sys and command2.com to boot into DOS, those 2 files ...
JVC HC-80 monitor output pinout
Score: 137.91 %,
Type: Forum topic , Comments: 3 comments
I've got a JVC HC-80 (MSX 2), but I lost the monitor cable, which is a DIN-6 connector. I was looking at the MSX Wiki and in the Internet whereabouts, but I didn't found. Does anyone has its pinout?
I double checked on the wiki, I ...
Seeking some rare games for purchase or trade
Score: 141.3 %,
Type: Forum topic , Comments: 3 comments
I figured I'd take a shot at locating some of the games that I haven't been able to find. Seeking complete copies, but there are a couple that I would take a loose copy of if it was a good price. These are all pretty much top-shelf games so I ...
What is going on over at 0x0038/VDP when NOT using EXX?
Score: 137.86 %,
Type: Forum topic , Comments: 17 comments
("myLeanInterruptRoutine") uses only A(F) and HL-register, and is doing IN and OUT from port 0x99.
And here is the deal: ... only in random frames ("POP-CODE").
Stub A
0x0038:
exx
push af
push hl
call myLeanInterruptRoutine
pop hl
pop af
exx
ei
reti
Stub B
0x0038:
push af ...
NMS 8280 RGB output vertical lines/quality
Score: 138.01 %,
Type: Forum topic , Comments: 26 comments
Need some help/advise for the vertical stripes (wobly) / output quality.
On my Anacona monitor the output quality was very good, noticed no issues. (Monitor stops after a few minutes so and needs to cool down to work for a few minutes again ). ...
Yahama CX5M black screen (MSX 1 computer)
Score: 140.78 %,
Type: Forum topic , Comments: 6 comments
Hi and apolgies for the essay. I'm investigating an MSX for a friend and have put together all of the info that I can from this splendid site, and have gone through all of the steps below. Thought it may help others who are new to the MSX.
When ...
Assembly
Score: 138.02 %,
Type: Forum topic , Comments: 48 comments
hl,0FFFFH , and a , sbc hl,de . (The and clears the carry flag for the sbc .) It is up to you ... with 2 bytes
$CA/*-2/ { JP L3 }
L4:$CA/*-0/ { JP L4 } infinite loop
[1] Turbo ... hl,at }
$E/$B4/ { ld c,$B4 }
$6/$0/ { ld b,0 }
$ED/$41/ { out ...
