Search results
Kings' Valley - revived
Score: 113.23 %,
Type: Forum topic , Comments: 21 comments
let's take it off the forum until we will fix it (my email address is available on the web-page). ...
1.6.0_10 (latest one)
Eugeny
Same problem here. Currently using Win2K, Firefox 3.0.3, JRE Same problem here. Currently using Win2K, Firefox 3.0.3, JRE 1.6.0b6.
Just tested it with the same ...
Service Manual for YIS805/128
Score: 113.74 %,
Type: Forum topic , Comments: 0 comments
Hi guys
if anyone of you have service manual for YIS805/128 please share.
Who had been doing service to this device please tell me how to disassemble keyboard (remove PCB from key assy - it seems unscrewing is not enough!)
Thanks in advance. ...
MSX2 does not boot from internal floppy
Score: 113.82 %,
Type: Forum topic , Comments: 23 comments
instead UNIT 0 (DS0) (normaly A) or something, it is the drive accesed as #1 instead #0 at the sector R/W ... to be #0. Is it correct ?
If so, putting jumpered B: to A: and using PC floppy as B: can be a perfect ... jumpers at the rear side. 0 seem to be DS0, 1 seem to be DS1 (do not know what other 2 are about). ...
SCC Cartridge
Score: 113.92 %,
Type: Forum topic , Comments: 8 comments
first SCC cartridge for 40$, the second and the last one - for 20$.
Just check this forum and e-bay ...
MSX1 network
Score: 113.94 %,
Type: Forum topic , Comments: 3 comments
Hi guys,
I have two YIS503II MSX1 machines and would like to connect them to each other through their network cards. I have circuit diagram for network cards, but have no cables/terminators or their pinouts/diagrams. Anyone can help?
Thanks! ...
SCRCOPY.BIN
Score: 113.88 %,
Type: Forum topic , Comments: 0 comments
Hi guys, there was a utility allowing to print graphical screen on the printer with very good quality. I have the file, but it seems to be corrupt (can not bload - no header, and it is not a "com" format). Would you please share it if you ...
YIS503III R3 does not work with 128K
Score: 114.06 %,
Type: Forum topic , Comments: 8 comments
on CX5MII pin 18 of CN401 (same memory board connector) is A0
are you sure 128K memory is for YIS503 ? ...
INT request conflict?
Score: 114.14 %,
Type: Forum topic , Comments: 6 comments
I am looking at MSX schematics, and wondering if we have two slots (SLT1 and SLT2) with two devices requesting maskable interrupt (through pin 8) there should be a conflict. The mechanism works the following way: device puts /INT onto the shared ...
Looking for documentation on S1985
Score: 114.14 %,
Type: Forum topic , Comments: 10 comments
configuration (eg. slot 0 expanded or not), and perhaps signal timings (delays). This is properly documented ... is pin layout, configuration (eg. slot 0 expanded or not), and perhaps signal timings (delays). This ...
Connecting V9938 to the VGA monitor
Score: 114.52 %,
Type: Forum topic , Comments: 2 comments
Is it possible? While I found composite sync sygnal to be used as horizontal sync, there is no vertical sync signal... And not sure which coding system is used by default. Any thought or someone tried that? Thanks.
You would need a scandoubler, ...
